正火处理对高铬铸铁深松铲尖力学性能的影响  

Effect of Normalizing on High Chromium Cast Iron Subsoiler with Mechanical Properties

作　　者：焦虹雨 郭建永[1] 林智 王恒进[1] 孙海朋[1] 董劲松 张伟[1] 李庆达[1] 

机构地区：[1]黑龙江八一农垦大学工程学院,黑龙江大庆163319

出　　处：《农机化研究》2018年第2期183-187,共5页Journal of Agricultural Mechanization Research

基　　金："十二五"国家科技支撑计划项目(2014BAD06B00);黑龙江省大学生创新创业训练计划项目(201510223019)

摘　　要：为解决自制高铬耐磨深松铲韧性差、易破碎的问题,对高铬铸铁进行了正火处理的研究。由试验结果可知:正火处理是提高铸造铲尖韧性的有效方法,经过正火处理的高铬深松铲尖的冲击韧度最大提高到1.8倍;随着正火温度的升高,铲尖的硬度和耐磨性有所下降,韧性显著提高,最佳的正火处理参数为900℃。试样的最佳力学性能为:维氏硬度543HV,冲击功3.0J,60min时的磨损量0.090g。In order to solve the self-made high chromium wear-resistant subsoiler poor toughness,easy to break the problem of high chromium cast iron were studied by normalizing treatment. The test results show that the normalizing treatment is an effective method to improve the toughness of casting shovel tip,after normalized Gao Geshen shovel tip of the maximum impact toughness increased to 1. 8 times. With the increase of normalizing temperature,hardness and wear resistance of the shovel tip decreased,significantly improve the toughness,normalizing the optimal parameters of 900 degrees,the best mechanical properties were as follows： Vivtorinox hardness is 543 HV,the impact energy is 3. 0J,the wear of weight was 0. 090 g in 60 minutes.

关 键 词：深松铲尖 正火 力学性能 

分 类 号：S220.6[农业科学—农业机械化工程]