PBT/PLA/增容剂共混体系的结构与性能表征  

Structure and Properties Characterization of PBT/PLA/Compatibilizer Blend System

作　　者：曹亚南 曹启淏 张玉芳[1] 

机构地区：[1]北京服装学院材料科学与工程学院,北京100029

出　　处：《塑料工业》2018年第1期113-118,共6页China Plastics Industry

基　　金：北京市自然科学基金项目暨北京市教委科技计划重点项目(KZ201510012013)

摘　　要：以聚丙烯共聚物接枝马来酸酐(PP-g-MAH)、乙烯-醋酸乙烯共聚物接枝马来酸酐(EVA-g-MAH)和丙烯腈-丁二烯-苯乙烯共聚物接枝马来酸酐(ABS-g-MAH)为增容剂,采用熔融共混法制备了不同组成比例的聚对苯二甲酸丁二醇酯(PBT)与聚乳酸(PLA)共混物,通过扫描电子显微镜(SEM)、差示扫描量热仪(DSC)、热失重分析仪(TG)、X射线衍射仪(XRD)等多种手段测试了共混物,详细研究PBT/PLA质量比、增容剂种类和用量对共混物结构与性能的影响。结果表明,共混物PBT/PLA为不相容体系,质量比为90/10时混合相对均匀;选择共混物PBT/PLA质量比为70/30时加入3种增容剂,发现增容剂对PBT/PLA共混物的增容效果中EVA-g-MAH优于PP-gMAH和ABS-g-MAH,且EVA-g-MAH含量为5%时共混物的相容性较好,对共混物的结晶行为影响显著。Poly（butylene terephthalate） /poly（lactic acid） （PBT/PLA） blends were prepared by melt blending with maleic anhydride grafted polypropylene （PP-g-MAH）, ethylene-vinyl acetate copolymer grafted malefic anhydride （EVA-g-MAH） and maleinized acrylonitrile-butadiene-styrene copolymer （ABS-g-MAH） as compatibilizers. The structure and properties of the blends were characterized by scanning electron microscopy （ SEM）, differential scanning calorimeter （ DSC ）, thermogravimetric analysis （TG） and X-ray diffraction analysis （XRD）. The effect of PBT/PLA mass ratio, the varieties and amount of the compatibilizers on the structure and properties of the blends were studied in detail. The results show that the PBT/PLA blend is incompatible, but PBT/PLA blend is relatively uniform with the weight ratio of PBT/PLA of 90/10. When three kinds of compatibilizers are respectively added into the PBT/PLA （70/30） blend, the compatibility effect of EVA-g-MAH is better than that of PP-g-MAH and ABS-g-MAH. And when the content of EVA-g-MAH is 5%, the compatibility of the blend is the best, and the crystallization behavior of the blend is significant.

关 键 词：聚对苯二甲酸丁二醇酯 聚乳酸 增容剂 相容性 结晶性 

分 类 号：TQ323.41[化学工程—合成树脂塑料工业]