梳棉机锡林齿深对盖板花中棉结的影响  

Effect of cylinder wire tooth-depth on nep in flat strips

作　　者：曹继鹏[1,2] 邵英海 张明光[1,2] 

机构地区：[1]辽东学院服装与纺织学院,辽宁丹东118003 [2]辽宁省功能纺织材料重点实验室,辽宁丹东118003

出　　处：《辽东学院学报（自然科学版）》2018年第1期1-3,35,共4页Journal of Eastern Liaoning University:Natural Science Edition

摘　　要：为更好地发挥梳棉机的锡林针布在不同工艺条件下对纤维的梳理作用,提高梳理效果和生条质量,采用两种齿深的锡林针布,在两种梳棉机产量条件下进行对比试验,将盖板花进行收集,采用Primier a Qura测试仪进行检测。试验结果显示,锡林齿深对盖板花质量是有影响的。浅齿比深齿更加有利于棉结的去除,尤其是纤维棉结的去除,对带籽屑棉结的去除浅齿和深齿相差不大;对于盖板花中棉结的平均尺寸而言,纤维棉结、带籽屑棉结和棉结总数的平均尺寸表现出相同的规律,均以0.3 mm齿深的锡林针布条件下的盖板花质量为好,排除的棉结尺寸较大。In order to give cylinder clothing a full play in carding and improve carding quality and sliver quality,two cylinder clothes with 0.3 and 0.4 mm tooth depth were selected in an experiment.The flat strips were collected and tested with Primier a Qura instrument.The results showed that the tooth-depth of cylinder cloth had effect on flat strips quality.A smaller tooth-depth was in favor of eliminating neps,especially the fiber nep.The tooth-depth did not affect the removal of seed coat nep.The average size of fiber nep,seed coat nep and total nep in flat strips tended to distribute in a same law.The flat strip quality was the best when the tooth-depth was 0.3 mm and the size of the eliminated neps was the larger.

关 键 词：锡林 齿深 盖板花 棉结 

分 类 号：TS103.22[轻工技术与工程—纺织工程]