莫尔-库仑准则下高强度混凝土的临界爆裂蒸汽压力  

Critical vapour pressure for explosive spalling of high-strength concrete based on Mohr-Coulomb criterion

作　　者：康亚明[1] 贾延 罗玉财 陈静波 

机构地区：[1]北方民族大学化学与化学工程学院,宁夏银川750021 [2]北方民族大学数学与信息科学学院,宁夏银川750021 [3]宁夏旭日众粒环保科技有限公司,宁夏银川750200

出　　处：《爆炸与冲击》2018年第1期224-232,共9页Explosion and Shock Waves

基　　金：国家自然科学基金项目(51369001;51569001)

摘　　要：高强度混凝土高温爆裂概率随含水率的增大而增大,表明蒸汽压力是诱发爆裂的重要因素之一,该压力通过改变有效应力影响了强度。为定量研究蒸汽压力对强度的影响,基于莫尔-库仑准则和有效应力原理,推导了临界爆裂蒸汽压力的求解公式,并从数理角度证明了其严密性,结果表明:(1)公式物理意义明确,并与现有的研究成果和实际工程灾害一致性好;(2)理论分析尚不能完全考虑材料物理特征对爆裂的影响,还需结合模型实验开展极端高温环境下理论模型中相关系数的测定;(3)应结合火灾后建筑物不同部位构件的破坏形态,从受力状态与破坏特征两方面去分析和反馈其中的机理,完善理论分析中的不足。The explosive spalling probability of high-strength concrete will increase with the increase of water content,which shows that the vapour pressure is one of the main factors causing the explosive spalling,and this pressure affects the strength through changing the effective stress. To determine the effect of vapour pressure on strength quantitatively,a formula of critical vapour pressure was obtained on the basis of the principle of effective stress and Mohr-Coulomb criterion,and its logical rigor was proved from the aspect of mathematics.The main conclusions are as follows.( 1) The theoretical formula has a clear physical meaning,and has a good consistency with the existing research results and the practical engineering disaster.( 2) The influences of material physical properties on the crack cannot be fully considered in theoretical analyses,so the mechanical tests of concrete at extreme high temperature are the bases for determining the relevant coefficients of theory analysis.( 3) Fire accidents should be investigated on the spot. Meanwhile,the destruction form and characteristics of different parts of the building should be analyzed after the fire. On the basis of these,the mechanism is clarified from the two aspects of the stress state and the ultimate failure characteristic of the component. Finally,the deficiencies were improved in theoretical analysis.

关 键 词：高强度混凝土 高温爆裂 有效应力 临界蒸汽压力 莫尔-库仑准则 温度应力 

分 类 号：O381[理学—流体力学] TU528[理学—力学]