柔性石墨金属波齿复合垫片金属骨架结构优化  

Metal Frame Structure Optimization of Flexible Graphite Covered Wave-serrated Metal Gaskets

作　　者：屈春叶 李力驳 

机构地区：[1]山西煤炭职业技术学院,山西太原030031 [2]赛鼎工程有限公司,山西太原030032

出　　处：《广东化工》2018年第2期81-82,72,共3页Guangdong Chemical Industry

摘　　要：在GB/T 19066.1-2008的基础上,利用数值模拟计算方法研究了波齿数、波齿深度对金属骨架力学性能的影响。采用了新的边界条件,使得计算结果能够准确地反映金属骨架的变形及应力分布情况。结构参数在以下条件下金属骨架具有较好的力学性能:波齿深度为金属骨架厚度的1/3左右;垫片单边宽度小于或等于10.5 mm时波齿数为3.5,垫片单边宽度大于10.5 mm时波齿数为4。Based on GB/T 19066.1-2008, the influence of teeth number and teeth depth to metal frame mechanical properties are studied using numerical simulation method. The deformation and stress distribution of metal frame are correct because of the reasonable boundary conditions. Metal frame has good mechanical properties in following conditions： teeth depth is almost 1/3 of metal frame thickness; teeth number is 3.5 when gasket width is less than or equal to 10.5 mm, teeth number is 4 when gasket width is greater than 10.5 mm.

关 键 词：波齿复合垫片 ANSYS 结构优化 

分 类 号：TQ050.3[化学工程]