检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李晓润[1,2] 宋波[1] 卞晓芳[2] 王频[2] 吴昌栋[2] 陈水荣[2] LI Xiaorun;SONGBo;BIAN Xiaofang;WANG Pin;WUChangdong;CHENShuirong(School of Civil and Resources Engineering,University of Science and Technology Beijing,Beijing 100083,China;Central Research Institute of Building and Construction,MCC Group Co., Ltd.,Beijing 100088,China)
机构地区:[1]北京科技大学土木与资源工程学院,北京100083 [2]中冶建筑研究总院有限公司,北京100088
出 处:《振动与冲击》2018年第1期111-116,149,共7页Journal of Vibration and Shock
基 金:国家"863"项目(2009AA0323);国家科技支撑计划课题(2012BAJ13B01)
摘 要:通过对外联式矩管柱与H形钢梁节点的低周往复加载试验,阐述了其破坏过程和破坏机理,获得了节点的滞回曲线和极限承载力。同时利用ABAQUS对试验进行了模拟分析,计算结果与试验吻合良好;讨论了钢梁翼缘、腹板厚度及矩管柱壁厚对钢节点性能的影响。结果表明,外联式矩管柱与H形钢梁节点具有良好的耗能能力和延性,节点的塑性耗能区集中在梁上,梁翼缘和腹板壁厚对节点的初始刚度、屈服荷载和极限荷载的影响较为明显,柱壁厚对节点力学性能影响较小。Low-cyclic loading experiments on a new type vertical outside connection between H-section beam and rectangular tube column were conducted. The damage phenomena and failure mechanism,the hysteretic performance and ultimate bearing capacity were presented. The software ABAQUS was adopted to establish the models in tests and the numerical results are almost consistent with the experiment ones. At the same time,the effects of the flange and web thicknesses of the beam,and the thickness of the rectangular tube column on the mechanical behaviors of the steel connection were analyzed. The results show that the connection has a good capacity of energy dissipation and is of enough ductility. The plastic hinges mainly occur in the beam. The initial stiffness,yielding load and ultimate load are obviously affected by the flange and web thicknesses of the beam. The thickness of the column has negligible effect on the behavior of the connection.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249