喷气涡流纺缝纫线与环锭纺缝纫线性能对比  

Performance comparison between MVS sewing thread and ring spinning sewing thread

作　　者：赵娜 丁莉燕 赵学玉 邢明杰[1] 田邵旭 

机构地区：[1]青岛大学纺织服装学院,山东青岛266071 [2]高密市元信纺织有限公司,山东潍坊260500

出　　处：《上海纺织科技》2018年第1期51-54,共4页Shanghai Textile Science & Technology

摘　　要：对喷气涡流纺缝纫线与环锭纺缝纫线的性能进行了测试、对比与分析。结果表明：环锭单纱及缝纫线的强力都略高于相应的喷气涡流纺产品,但是喷气涡流纺缝纫线相对于单纱的强力增加率大于环锭纺;喷气涡流纺单纱的千米纱疵数大于环锭纺单纱,而喷气涡流纺缝纫线的千米纱疵数与环锭纺基本持平;喷气涡流纺单纱及其缝纫线的毛羽指数都远远小于环锭纺;喷气涡流纺单纱断裂伸长率小于环锭纺单纱,喷气涡流纺缝纫线的伸长率略小于环锭纺缝纫线。The performance of MVS sewing thread anti ring spinning sewing thread is tested, compared and analyzed. The experimental results show that the strength of the ring single yarn and ring sewing thread are slightly higher than that of MVS products, but the increasing percentage in strength between MVS sewing thread and its single yarn is higher than that of ring spinning products; compared with ring yarn, MVS yarn has less yarn defects, but the number of yarn defects in MVS sewing thread is similar as that of ring spinning thread; the hairiness index of MVS yarn and sewing thread are far less than that of ring spinning products; the breaking elongation of MVS yarn is less than that of ring yarn, and the elongation of MVS sewing thread is slightly smaller than that of ring spinning thread.

关 键 词：缝纫线 环锭纺纱 喷气纺纱 性能 纱线结构 

分 类 号：TS101.922[轻工技术与工程—纺织工程]