平整液对镀锡板脱脂效果的影响  

Influence of Tempering Lubricant on the Degreaser Effect of Tinplate

作　　者：李萍[1] 李晓东[1] 蒯珊 陆伟星[1] 张千峰[1] 

机构地区：[1]安徽工业大学分子工程与应用化学研究所,安徽马鞍山243002

出　　处：《电镀与环保》2018年第1期12-15,共4页Electroplating & Pollution Control

基　　金：校企产学研联合科技攻关项目

摘　　要：研究了脱脂剂中平整液的体积分数对其脱脂效果及基板电镀效果的影响。基板脱脂和电镀后,采用极化曲线、交流阻抗、中性盐雾试验和附着力试验对其性能进行测试。结果表明:脱脂剂中平整液的体积分数在0%~5%之间,对脱脂效果影响不大;但随着平整液的体积分数的增大,脱脂效果相应减弱,镀锡板的耐蚀性、附着力下降,严重影响基板的电镀效果。The influence of the volume fraction of tempering lubricant in degreasing agent on the degreasing effect and the electroplating effect of the substrate was studied. After degreasing and electroplating, the properties of the substrate were tested by electrochemical polarization curves, alternating current impedance, neutral salt spray experiment and adhesion test. Results showed that there was little influence on degreasing effect when the volume fraction of tempering lubricant in degreasing agent was 0%~5%. However, with the increase of the volume fraction of tempering lubricant, the degreasing effect was weakened, and the corrosion resistance and adhesion force was decreased, which seriously affect the electroplating effect of the substrate.

关 键 词：平整液 脱脂效果 镀锡板 耐蚀性 附着力 

分 类 号：TQ153[化学工程—电化学工业]