白乳胶与硅溶胶复配粘结剂对铸铁件消失模铸造涂料性能的影响  

Effect of White Latex Binder with Silica Solution on the Lost Foam Casting Coating for Iron Casting

作　　者：王宏瑞 靳玉春[1] 赵宇宏[1] 侯华[1] 

机构地区：[1]中北大学材料科学与工程学院,山西太原030051

出　　处：《铸造》2018年第1期37-40,共4页Foundry

基　　金：国家自然科学基金(Nos.51774254;51774253;51701187;U1610123;51674226;51574207;51574206);山西省科技重大专项(MC2016-06)

摘　　要：为改善铸铁件消失模铸造涂料的性能,分别研究了单一粘结剂白乳胶与硅溶胶,以及二者复配溶液对涂料性能的影响。结果表明,采用单一粘结剂,无论是白乳胶还是硅溶胶,其加入量在2%~3%时,都能较好地满足涂料的使用要求。当二者进行复配后,白乳胶与硅溶胶的配比为2:3时,涂料的综合性能要比单一使用粘结剂更优,其悬浮性、触变性更好,流杯粘度、涂层强度和透气性适宜,而且涂挂性和高温抗裂性良好,是带有一定屈服值的较理想假塑性流体。In order to improve the performance of LFC coating for iron casting, the effects of single white latex binder and silica solution, and the two above different proportion of solutions on the performance of coatings were respectively researched. The results show that the coating can better meet operation requirements when the additive amount of single white latex binder and silica solution is 2%-3%. With compound of white latex binder and silica solution of distribution proportion 2：3, the comprehensive performance of coating is best compared with single binder, suspension property and thixotropy is better and thixotropy is optimal; the viscosity of flow cup, coating strength and permeability are also appropriate; furthermore the coating has good smearing and good high temperature crack resistance, it is the ideal pseudoplastic fluid with certain yield value.

关 键 词：白乳胶 硅溶胶 粘结剂 消失模铸造 涂料 假塑性流体 

分 类 号：TG221[金属学及工艺—铸造]