旋转通道等径角平行挤压模具应力分析  

Stress analysis on parallel extrusion die with rotated channel and equal angular

作　　者：张婷 何敏[1] 原浩 颜林泉 达成 丁鹏 周凡哲 姚倩楠 Zhang Ting;He Min;Yuan Hao;Yan Linquan;Da Cheng;Ding Peng;Zhou Fanzhe;Yao Qiannan(School of Mechanical and Electrical Engineering, Xuzhou University of Technology, Xuzhou 221111, China)

机构地区：[1]徐州工程学院机电工程学院

出　　处：《锻压技术》2018年第2期157-161,共5页Forging & Stamping Technology

基　　金：国家自然科学基金资助项目(51401177);江苏省高校自然科学研究重大项目(17KJA460010,16KJA430003);江苏省自然科学基金资助项目(BK2013222);江苏省青蓝工程优秀青年骨干教师计划(苏教师2014-23);徐州市科学计划项目(KC16 SG279,KC16HQ238);徐州工程学院大学生创新创业基金项目(XCX2017109)

摘　　要：为制备超细晶结构时效硬化型铝合金提出了旋转通道等径角平行挤压工艺,针对该工艺建立模具模型,采用Deform-3D软件对旋转通道等径角平行挤压模具进行了应力分析。利用容差值插值计算法,获得容差值与挤压模具力的关系,得出旋转通道模具的应力分布规律及容差值对模具应力的影响规律。结果表明：过小的容差值,会导致成形力与模具力相差较大;过大的容差值,并不一定能提高计算精度,但会增大计算量;准确的容差值是成形力映射到模具获得模具应力的关键,该工艺中模具应力分析容差值应为1。模具外壁50 MPa为安全载荷,应力集中区域在旋转通道与直通道过渡处。此安全载荷下通过线性外推法获得模具厚度为40 mm。In order to prepare age hardened aluminum alloy with ultra-fine grain structure,a paralled extrusion process with rotated channel and equal angular was proposed. Then,the die model was built,and the die stress analysis on parallel extrusion die with rotated channel and equal angular was conducted by software Deform-3 D. Furthermore,the relationship between tolerance value and extrusion force was obtained,and the stress distribution and the influence of tolerance value on die stress were obtained by tolerance interpolation calculation method. The results show that the small tolerance value leads to a great difference between forming force and extrusion force,and an excessive tolerance value may not improve the calculation accuracy and can increase the calculation complexity. However,the exact tolerance value is the key to obtain die stress after mapping the forming force to the die,and the tolerance value is designed as 1. Thus,the safe load at die edge is set as 50 MPa,and the stress concentration region locates at the transition between rotating channel and straight channel. Finally,the die thickness is designed as 40 mm by the method of linear extrapolation.

关 键 词：旋转通道等径角平行挤压 模具应力分析 容差值 DEFORM-3D 模具厚度 

分 类 号：TG375.41[金属学及工艺—金属压力加工]