检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]陕西延长石油(集团)有限责任公司油气勘探公司,陕西延安716000
出 处:《辽宁化工》2018年第1期46-47,共2页Liaoning Chemical Industry
摘 要:注水开发过程中油层的主要伤害体现在注入水与地层岩石不匹配和注入水与地层流体不配伍方面上,且注水层渗流通道易受损害的部位是吼道。长期注水开发导致储层特性发生变化,注入水的长期水洗和冲刷会提高储层渗透率,改变储层的润湿性与孔隙结构,并使注水开发后期储层的微观复杂度增大。针对安塞油田长5的低渗、低压、低产的典型油藏,应在注入水中加入粘土防膨剂以及粘土稳定剂,并严格控制水中机械杂质的含量。以孔隙结构与喉道中值为依据控制水中的固体粒径,并对注入水进行过滤处理。在注入水中加入表面活性剂,使强亲水性的岩石转为弱亲水,有利于油在渗流通道中的流动。。The main damage of water flooding development to oil reservoirs is reflected in the mismatch of injected water and formation rock and the incompatibility between injected water and formation fluid, and the vulnerable part of seepage aqueduct is roar. Long-term waterflooding results in changes of reservoir characteristics. Long-term water washing and scouring of injected water increase reservoir permeability, change reservoir wettability and pore structure, and increase the micro-complexity of reservoirs in the late waterflooding stage. For the typical reservoirs with low permeability, low pressure and low production in Chang 5 of Ansai oilfield, clay anti-swelling agents and clay stabilizers should be added into injected water and the content of mechanical impurities in water should be strictly controlled. Based on the pore structure and throat median value, the solid particle size in water should be controlled, and the injected water should be filtered. Surfactant should be added into the injected water to turn the strongly hydrophilic rock into a weakly hydrophilic one, facilitating the flow of oil in the seepage channel.
关 键 词:注水开发 渗流通道 渗透率 粘土防膨剂 粘土稳定剂 表面活性剂
分 类 号:TE357.6[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3