钼合金钻孔加工中钻削轴向力实验研究  

Experimental Study on Drilling Axial Force during Drilling Machining of Molybdenum Alloys

作　　者：刘东 王放 周鹏 

机构地区：[1]北方工业大学机械与材料工程学院,北京100144 [2]北京机电研究所,北京100083

出　　处：《稀有金属与硬质合金》2018年第1期33-35,共3页Rare Metals and Cemented Carbides

基　　金：北京市自然科学基金资助项目(3113027);北京市教委基本科研业务项目

摘　　要：对钼合金钻孔过程中不同钻削参数下的钻削轴向力和钻削扭矩进行了实验测量,并对进给速度和主轴转速对钻削轴向力和钻削扭矩的影响进行了分析。结果表明:当进给速度一定而主轴转速变化时,钻削轴向力随钻削速度增加而略有减小,钻削扭矩随主轴转速增加而减小。当主轴转速一定而仅进给速度变化时,钻削轴向力和钻削扭矩均随进给速度增加而增加,进给速度的变化对钻削轴向力和钻削扭矩的影响要比主轴转速变化的影响更显著。The drilling axial force and drilling torque during drilling machining of molybdenum alloys with different drilling parameters were measured by experiments.The effect of feed speed and spindle speed on drilling axial force and drilling torque was analyzed.The results indicate that with constant feed rate and changed spindle speed,the drilling axial force slightly decreases with the increase of spindle speed,and the drilling torque also decreases with the increase of spindle speed.With constant spindle speed and changed feed rate,both drilling axial force and drilling torque increase with feed rate increasing.Feed rate has more significant influence on drilling axial force and drilling torque than spindle speed.

关 键 词：钼合金 钻孔加工 钻削参数 钻削轴向力 钻削扭矩 

分 类 号：TG506.1[金属学及工艺—金属切削加工及机床]