检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]广州大学土木工程学院,广东广州510006 [2]广州市建筑科学研究院有限公司,广东广州510440
出 处:《广州大学学报(自然科学版)》2017年第6期37-41,47,共6页Journal of Guangzhou University:Natural Science Edition
基 金:广州市科技计划资助项目(201508010039);广州市科技创新平台资助项目(15180005)
摘 要:文章研究了预混浇注法工艺条件下短切玻璃纤维长度与掺量对GRC抗弯性能的影响.研究表明,当玻璃纤维掺量为水泥质量3%,长度为12~30 mm时,GRC均具有较高的抗弯强度.在预混浇注法工艺条件下,水胶比为0.5时,玻璃纤维对GRC抗弯强度贡献不显著,当玻璃纤维掺量达水泥质量的6%时,GRC抗弯强度明显上升;在一定掺量范围内,玻璃纤维掺量越高,GRC的峰值挠度越大,弯曲应力—挠度曲线下降段越平缓,GRC韧性破坏特征越明显.In this paper, effect of chopped glassfibre length and content on bending properties of premixed cast- ing GRC is studied. The study suggests that GRC has high bending strength when the glassfibre content is 3% of the mass of the cement, and the length of glass fiber is 12 - 30 mm. Under the condition of premixed casting method, the contribution of glass fiber to GRC bending strength is not significant hen the water-cement ratio is 0.5. The bending strength of GRC increases obviously when the glassfibre content is 6% of the cement mass. In a certain range of glassfibre content, the higher the glassfibre content is, the greater the peak deflection of GRC is, and the more obvious the descending section of bending stress-deflection curve is, the more obvious the GRC ductile failure characteristics are.
关 键 词:玻璃纤维增强水泥(GRC) 预混浇注法 抗弯强度 荷栽-挠度曲线
分 类 号:TB301[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222