检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]成都理工大学地质灾害防治与地质环境保护国家重点实验室,成都610059 [2]四川省交通运输厅公路规划勘察设计研究院,成都610041
出 处:《科学技术与工程》2018年第6期217-222,共6页Science Technology and Engineering
基 金:国家科技支撑计划(2015BAK09B01);国家创新研究群体科学基金(41521002);国家"973"计划(2013CB733202)资助
摘 要:通过单轴压缩试验、直剪试验和为期120 d饱水三轴压缩试验,结合板岩成分,研究了板岩在饱水之后的力学性质变化和水物理化学损伤机理。研究表明:自然浸水条件下,在最初4 d吸水率变化较大,约8 d之后板岩吸水率趋于稳定,但水岩作用依旧存在且明显滞后于吸水率的变化;随饱水时间的增长,各项力学参数试验均有衰减,饱水60 d后,板岩峰值强度趋于稳定。板岩水物理损伤主要受库区水环境影响,水物理损伤主要受水流导致矿物颗粒间胶结物和碎屑的运移和扩散,这与水化学损伤的水环境p H等密切相关。通过质量与强度变量,从宏观上量化评估板岩损伤劣化程度。The mechanical properties changes and hydro-physico-chemical damage mechanism of slate after water saturation were studied by uniaxial compression tests,direct shear tests and a 120-day saturated triaxial compression experiment. The study reveals that under the condition of natural water immersion,the water absorption rate changes greatly in the first 4 d,and after about 8 d the water absorption rate of the slate tends to be stable,but the water-rock interaction is still lagging behind the water absorption. The mechanical properties parameters are decaying with the growth of water saturation time,after water saturation for 60 d,the peak strength of slate tends to be stable. The physical damage of slate water is mainly affected by the water environment of the reservoir area. The hydro-physico-chemical damage is mainly caused by the migration and diffusion of cement particles and debris,which is closely related to the p H of water environment. A quantitative assessment of the extent of slate damage from the macroscopic can be made through the quality and intensity variables.
分 类 号:P642.3[天文地球—工程地质学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117