一种基于手工焊载波遥控式联网管控方法  

A wave-carrier remote control method based on manual welding

作　　者：刘树雨[1] LIU Shuyu(Panasonic Welding Systems （Tangshan Co., Ltd.,Tangshan 063020, China)

机构地区：[1]唐山松下产业机器有限公司,河北唐山063020

出　　处：《电焊机》2018年第2期42-46,共5页Electric Welding Machine

摘　　要：介绍一种基于手工焊载波遥控式联网管控方法,焊工在焊接工位远程对焊机进行通道及焊接电流参数设置,焊机收到后与上位机进行数据交换,确认是否在生产管理所下发的允许使用通道和焊接电流的范围内,若符合则允许焊接;如果焊工设定并发送的通道数与生产管理所下发的允许使用通道数不同,经过焊机内CPU进行数据处理判断不同,焊机交互界面进行报警提示,不允许焊接,若通道相同,经过焊机内CPU进行数据处理判断相同,焊工再次发送焊接电流值,若焊工设定并发送的焊接电流值不在生产管理所下发的允许焊接电流范围内,经过焊机内CPU进行数据处理判断,焊机交互界面进行报警提示,不允许焊接,若焊接电流值在允许范围内,符合所有焊接条件,允许焊接。This paper introduces a wave-carrier remote cantrol method used in the intelligent manual welding management system ,welders in the welding position of welding parameters and the remote channel carrent is set,after receiving the welder and PC for data exchange,to confirm whether the production management of the channel and allow the use of current range,if the line allows the welding;if the number of channels set and sent by the welder is different from the number of channels allowed to be issued by the production management center, the ehannels are determined hy the CPU in the welding machine to process the data. The welder interface prompts fi）r an alarm and welding is not allowed. If the channels are the same,after welding machine CPU data processing to determine the same welder at this time to send the welding current value,if the welder to set and send the welding current value is not in the production management issued by the welding carrent range,after welding machine CPU data processing judgment,welding machine interactive interface alarm,does not allow welding,if the welding carrent value is within the allowable range,all welding conditions are allowed,and welding is allowed.

关 键 词：焊机 载波遥控器 联网监控 服务器 上位机 

分 类 号：TG409[金属学及工艺—焊接]