基于AMESim的盾构刀盘液压驱动系统多级功率控制模式仿真研究  

Simulation Investigafion on Multistage Power Control Mode of Hydraulic Drive System of Shield Disk Cutter Based on AMESim

作　　者：郝用兴 雷超 周洋 陈子义 

机构地区：[1]华北水利水电大学机械学院,郑州450045

出　　处：《科学技术与工程》2018年第5期50-55,共6页Science Technology and Engineering

基　　金：国家高技术研究发展计划(863计划)(2012AA041802);河南省科技攻关重点项目(122102210166);国家留学基金委地方合作项目(201308410091);2015年度河南省基础与前沿技术研究项目(152300410215)资助

摘　　要：为使盾构机刀盘液压驱动系统在复杂地质层条件下节能降耗,在恒功率调速的基础上建立多级功率控制模式,即满载模式(100%全功率)、经济模式(80%全功率)、轻载模式(60%全功率)下,实现功率的可调;并针对某型盾构机在软土与砂土两种地质层负载载荷随机变化,借助AMESim软件对系统在三种工作模式下进行仿真分析和对比研究。结果表明软土地质层为保证盾构机的正常工作,选用满载模式或经济模式;砂土地质层为提高系统工作效率,降低能耗,选用经济模式或轻载模式。In order to archive energy saving and consumption reducing of hydraulic drive system of shield disk cutter under the condition of complex geological layer,a multilevel power control mode is established on the basis of constant power speed regulation,namely full load mode（ 100% full power）,economic mode（ 80% full power）and light load mode（ 60% full power）,which makes the power adjustable. And the simulation analysis and contrast research of system is obtained in the three operation modes with the help of AMESim software for a type of shield machine in two kinds of geological layers of soft soil and sand under random load conditions. The results show that the full load mode or economic mode should be adopted to ensure the normal operation of the shield machine in the soft soil geological layer,while the economic mode or light load mode should be used to enhance the working efficiency and reduce energy consumption of the machine in the sandy soil geology layer.

关 键 词：盾构刀盘 液压驱动系统 控制模式 AMESIM仿真 节能 

分 类 号：TH137.9[机械工程—机械制造及自动化]