磨削工艺对刀具刃口质量及寿命的影响  

Influence of Grinding Process on Edge Quality and Life of Cutting Tool

作　　者：何荣跃 宋安邦 文立东 赵巍 孔维平 

机构地区：[1]成都工具研究所有限公司

出　　处：《工具技术》2018年第1期63-65,共3页Tool Engineering

基　　金：四川省科技支撑计划(2015JZ0008)

摘　　要：采用不同粒度的砂轮和不同的磨削加工余量对硬质合金刀具进行磨削加工,得到不同情况的刃口形貌,使用显微镜观察不同刃口形貌的崩缺情况。试验结果表明,磨削加工硬质合金刀具时,合理的选用砂轮粒度和磨削余量,能够有效地减小和控制刀具刃口的崩缺情况,提高刀具寿命。The different sizes of grinding wheels and grinding allowances are used to grind the cemented carbide blocks to obtain the cutting edge morphologies under different conditions. The microscope is also used to observe the different cutting edge chipping morphologies. The experimental results show that when a carbide cutting tool is grinded,a reasonable choice of grinding wheels with smaller grain size and the use of smaller grinding allowances can effectively reduce and control the cutting edge chipping.

关 键 词：砂轮粒度 磨削余量 刃口形貌 刃口崩缺 

分 类 号：TG580[金属学及工艺—金属切削加工及机床] TG61