基于电塑性-超声振动耦合作用的钛合金车削实验研究  

Research on turning of titanium alloy based on the electro-plastic-ultrasonic vibration coupling effect

作　　者：廖鹏飞 路冬[1,2] 舒嵘 吴勇波[2,1] 

机构地区：[1]南昌航空大学航空制造工程学院,江西南昌330063 [2]南方科技大学机械与能源工程系,广东深圳518055

出　　处：《陕西师范大学学报（自然科学版）》2018年第2期35-39,共5页Journal of Shaanxi Normal University：Natural Science Edition

基　　金：国家自然科学基金(51405218);江西省自然科学基金(20151BAB206046);江西省研究生创新专项资金(YC2016-S346)

摘　　要：基于电塑性-超声振动耦合作用的钛合金车削技术,分别设计了钛合金普通车削实验、超声振动辅助车削实验及电塑性-超声振动耦合辅助车削实验。结果表明:与普通车削相比,超声振动辅助车削切削力降低,表面质量改善不明显,电塑性-超声振动耦合辅助车削的切削力在超声振动辅助车削的基础上进一步降低,并且表面质量较前两种方式有了明显的改善。分析了放电电压及放电频率对电塑性-超声振动耦合辅助车削切削力及表面质量的影响,发现选取较大的放电电压及较高的放电频率,可降低切削力并获得较好的表面质量。The titanium alloy turning technique based on the electro-plastic ultrasonic- vibration coupling effect is proposed. Tests for conventional turning （CT）, ultrasonic-vibration assisted turning （UAT） and electro-plastic ultrasonic-vibration assisted turning（EUAT）of titanium alloy are carried out. Comparing with CT, the cutting forces decreases a little in UAT, while decreases obviously in EUAT. It also turns out that compared with CT, the surface quality is not a noticeable change in UAT but a effectively improvement in EUAT. The effects of discharge voltage and discharge frequency on the cutting force and surface quality of EUAT are investigated. The experimental also reveals that a larger discharge voltage and a higher discharge frequency are imperative to reduce the cutting force and obtain a better surface quality.

关 键 词：钛合金 电塑性-超声振动耦合 车削 切削力 表面粗糙度 

分 类 号：TG506.5[金属学及工艺—金属切削加工及机床]