基于Simufact变薄拉伸锡青铜滑动轴承的应力应变分析  

Stress Strain Analysis of Ironing Tin Bronze Sliding Bearing based on Simufact

作　　者：李辉 杨锋 Li Hui1 ,Yang Feng2(1.Department of Mining Engineering, Lialiang College;2.College of Mechanical Engineering, North University of Chin)

机构地区：[1]吕梁学院矿业工程系 [2]中北大学机械工程学院

出　　处：《特种铸造及有色合金》2018年第3期339-341,共3页Special Casting & Nonferrous Alloys

基　　金：吕梁学院科研基金资助项目(ZRQN201605)

摘　　要：在相同减薄率下,基于Simufact软件对QSn7-0.2锡青铜滑动轴承(同一毛坯)分别进行1次变薄拉伸成形与3次连续变薄拉伸成形的数值模拟,以变薄拉伸后滑动轴承成形件沿壁厚方向的等效塑性应变与等效应力为评价指标,选取最佳成形工艺。结果发现,3次连续变薄拉伸的等效塑性应变与等效应力皆大于1次变薄拉伸;且1次变薄拉伸在壁厚方向上的应力、应变变化较小;沿壁厚方向由外至内,变薄拉伸的等效塑性应变呈逐渐减小的趋势,等效应力则是先减小后增大。One ironing and three ironing deformation of QSn7-0.2 tin bronze sliding bearing blank were simulated by the Simufact software at the same ironing rate.The optimum forming process was determined by the equivalent plastic strain and equivalent stress of the sliding bearing forming part along the wall thickness as evaluated value.The results show that the equivalent plastic strain and equivalent stress of three continuous ironing are greater than that of once ironing,and the stress and strain of a ironing in the thickness of the wall is the smaller.In addition,the equivalent plastic strain of the ironing is gradually decreased from the outside to the inside,while the equivalent stress is decreased firstly and then increased.

关 键 词：滑动轴承 Simufact 变薄拉伸 等效塑性应变 等效应力 

分 类 号：TP311[自动化与计算机技术—计算机软件与理论] TG146.11[自动化与计算机技术—计算机科学与技术]