高精度DDS数字IP核的设计  

Design of High Precision DDS IP

作　　者：张科新[1] 余建[1] ZHANG Kexin, YU Jian(Institute of Electronic and Electrical Engineering, Changzhou College of Information Technology, Changzhou Jiangsu 213164, Chin)

机构地区：[1]常州信息职业技术学院电子与电气工程学院,江苏常州213164

出　　处：《电子器件》2017年第6期1456-1458,共3页Chinese Journal of Electron Devices

摘　　要：为了满足雷达系统对高精度DDS(直接数字式频率合成器)的需求,综合使用查表法、复数旋转和线性拟合3种方法,提高DDS输出信号的无杂散动态范围SFDR。当相位累加器为24bit时,使用小于1 kbyte的ROM。仿真表明所设计的DDS,输出信号的SFDR大于110 d B,等效相位截断约为2 bit。在大幅降低对ROM使用量的同时,有效降低了相位截断的bit数,同时达到了设计要求。采用TSMC 55 nm工艺进行综合后,综合结果表明运行速度高达600 MHz,满足了雷达系统对速度的需求。A high precision DDS（Direct Digital Synthesizer） is designed to satisfy the radar system which used loop-tap,complex multiplier,linear fitting to increase the SFDR（Spurious Free Dynamic Range）.When the phase adder is 24 bit width,the used capacity of ROM is less than 1 kbyte.The simulation results show that the SFDR is greater than 110 d B,and the phase truncation is about 2 bit.So the used capacity of ROM is greatly reduced and the bit of phase truncation is also reduced,the requirement of design is achieved.After design compile using TSMC55 nm technology,the speed can achieve 600 MHz,it also satisfies the demand of radar system.

关 键 词：直接数字式频率合成器(DDS) 高精度 复数旋转 线性拟合 流水线 

分 类 号：TN74[电子电信—电路与系统]