检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:代云霞[1] 林荃[1] DAI Yun-xia, LIN Quan(CCCC-FHDI Engineering Co., Ltd., Guangzhou, Guangdong 510230, China)
机构地区:[1]中交第四航务工程勘察设计院有限公司,广东广州510230
出 处:《中国港湾建设》2018年第4期12-16,共5页China Harbour Engineering
摘 要:采用英国GDS公司生产的应力控制式三轴仪,对珠三角地区的软土进行了K_0固结试验,分析了K_0在加载、卸载过程中的变化规律,总结了K_0随内摩擦角及超固结比的变化特点,并将试验结果与经验公式的计算值进行了对比。得出土体在超固结状态下,加载及卸载阶段K_0系数变化规律相反,前者迅速减小,稳定于正常固结阶段K_0值,后者与超固结比呈幂函数关系逐渐增大接近初始值。文中所测试验数据拟合的n值与有效内摩擦角正弦值呈良好线性关系,且n值与规范建议值极为接近,基于此提出计算n的新公式。We carried out K0 consolidation tests on the soft soil in the Pearl River Delta area based on the stress-controlled triaxial apparatus which is generated by Britain GDS company, analyzed the transformation law of K0 during the loading and unloading stage, summarized the variation characteristics of K0 with the internal friction and over-consolidation ratio, and compared the experimental results with the calculated values of the empirical formulas. It is concluded that, the change rule of K0 coefficient is opposite when the sample is loaded and unloaded during over-consolidation stage. The former one decreases sharply and become stable in the normally consolidated stage K0 value. The latter one has a power function relationship with the over-consolidation ratio, and gradually increases close to the initial value. The relationship between fitting value of n basing on experimental data and sine value of effective angle of internal friction is linearity, and the value of n is very close to suggestive value of standard. Then the new formula for calculating n is proposed.
关 键 词:静止土压力系数 K0固结试验 有效内摩擦角 超固结比
分 类 号:U652.74[交通运输工程—港口、海岸及近海工程] TU432[交通运输工程—船舶与海洋工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15