检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:支金花[1,2] 张敏 王裕[1] 李乐 李继红 Zhi Jinhua;Zhang Min;Li Le;Wang Yu;Li Jihong(College of Materials Science and Engineering, Xi'an University of Technology, Xi'an Shaanxi 710048, China;Xi'an Shaangu Power Co. , Ltd. , Xi'an Shaanxi 710075, China)
机构地区:[1]西安理工大学材料科学与工程学院,陕西西安710048 [2]西安陕鼓动力股份有限公司,陕西西安710075
出 处:《金属热处理》2018年第4期53-56,共4页Heat Treatment of Metals
基 金:国家自然科学基金(51274162);陕西省教育厅服务地方专项(16JF021);陕西省协同创新计划(2015XT-39)
摘 要:研究了淬火加不同温度回火热处理对04Crl3Ni5Mo钢组织、常温和高温力学性能的影响。结果表明:经淬回火处理后,组织以较细的板条状回火马氏体为主;随着回火温度的升高,强度、硬度逐渐增大,塑韧性有不同程度的降低;在高温进行拉伸试验,随温度的升高,强度增大,断后伸长率则先增加后降低。Effects of quenching and tempering on microstructure, room temperature and high temperature mechanical properties of 04Crl3NiSMo steel were studied. The results show that after quenching and tempering treatment, the mierostrueture is dominated by the finer lath tempered martensite. With increase of tempering temperature, the strength and the hardness of the steel increase, and the ductility decreases in different degree. The high temperature tensile test results show that with the increase of temperature, the strength increases, while the elongation first increases and then decreases.
关 键 词:04Crl3Ni5Mo 热处理 组织 力学性能
分 类 号:TG142.24[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249