冲孔卸压抽采技术在中马村矿突出煤层中的应用  被引量:3

Application of Hydraulic Flushing and Pressure Relief Technology in Outburst Coal Seam of Zhongmacun Coal Mine

在线阅读下载全文

作  者:陶云奇[1,2] 周正涛 徐冬冬[1] TAO Yunqi;ZHOU Zhengtao;XU Dongdong(School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, China;Research Institute of Henan Energy Resource and Chemical Industry Group Co., Ltd., Zhengzhou 450046, China)

机构地区:[1]河南理工大学,河南焦作454000 [2]河南能源化工集团研究院有限公司,河南郑州450046

出  处:《煤矿安全》2018年第4期65-67,71,共4页Safety in Coal Mines

基  金:河南省创新型科技人才队伍建设工程资助项目(164100510024)

摘  要:针对中马村矿存在高瓦斯煤层的问题,采用了水力冲孔技术,介绍了水力冲孔增透机理,通过在中马村矿开展水力冲孔卸压抽采技术工业性试验,初步确定了水力冲孔最优冲煤量和有利于冲孔的钻孔倾角。结果表明:单孔冲煤量在0.4~1.3 t/m范围内上下浮动,冲煤量主要以0.8 t/m居多,即最优冲煤量为0.8 t/m;钻孔的倾角对水力冲孔的冲煤量有一定的影响,钻孔倾角在40°~70°之间最有利于冲孔。采取水力冲孔增透抽采措施后与普通钻孔相比,抽采瓦斯初始流量平均提高5倍以上,衰减系数降低50%以上。For the problem of high gas coal seam in Zhongmacun Coal Mine, hydraulic flushing technology was adopted to study the hydraulic flushing and permeability increase mechanism, the optimal coal flushing quantity and optimum dip angle of hole were determined through industrial test in Zhongmacun Coal Mine by using hydraulic flushing technology. The results showed that the coal flushing quantity of single hole is floated in the range of 0.4 t/m to 1.3 t/m and the coal flushing quantity of 0.8 t/m is the majority. The inclination of drilling hole has an important influence on the coal flushing from hydraulic flushing hole and the angle of hydraulic flushing hole between 40° and 70° is best for flushing. Comparing hydraulic flushing technology with ordinary drilling, the initial extraction gas flow was increased by more than five times, attenuation coefficient was decreased by more than50 percent.

关 键 词:水力冲孔 卸压抽采 最优冲煤量 最佳钻孔倾角 瓦斯初始流量 衰减系数 

分 类 号:TD713[矿业工程—矿井通风与安全]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象