检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:辛泽宇 周东方[1] 刘起坤[1] 刘元锋 XIN Zeyu;ZHOU Dongfang;LIU Qikun;LIU Yuanfeng(Information System Engineering Institute, Information Engineering University, Zhengzhou 450001, China;Unit 65044 of the PLA, Dalian 116000, China)
机构地区:[1]解放军信息工程大学信息系统工程学院 [2]65044部队
出 处:《电波科学学报》2018年第1期71-76,共6页Chinese Journal of Radio Science
基 金:国家863计划项目(2014AA01A707)
摘 要:基于感应电流率理论,提出了将阻挡面积与口径场分布相结合的阻挡比计算方法,修正了传统算法存在的入射场分布不均匀问题,分析了金属桁架电磁窗中金属桁杆的散射效应,研究了桁架阻挡比在特定天线口径场分布下对天线传输特性的影响,以卡塞格伦天线为例计算了平行极化波入射桁杆阵列时的插入损耗,并将计算结果与FEKO软件中矩量法仿真结果进行了对比验证.结果表明:考虑天线口径场的阻挡比算法相比传统算法在计算精度上有了较大提高,最大误差不超过0.1dB;金属桁架电磁窗的插入损耗不仅受阻挡面积与感应电流率的影响,还与天线口径场能流密度分布有关;减小阻挡比,是设计低损耗电磁窗的有效途径.Based on the theory of induced current rate,a method of calculating the relative shading rate combined the shielding area with the aperture field distribution is proposed.The problem of the inhomogeneity of the incident field in the traditional algorithm is modified.And the scattering of the metal bar in the electromagnetic window is analyzed.The effect of the grid shading rate on the antenna transmission characteristics under the aperture distribution of a specific antenna is discussed.The insertion loss of the planar array is calculated.The results are compared with the method of moments(MOM)simulation results using the FEKO software.The results show that the relative blocking algorithm improves the accuracy greatly with the maximum error less than 0.1 dB compared with the traditional algorithm.The insertion loss of the electromagnetic window is not only affected by the shielding area and the induced current rate,but also by the aperture field energy flow density distribution.Reducing the relative blocking rate is an effective way to design the low-loss radome.
关 键 词:平面电磁窗 金属空间桁架 感应电流率 阻挡比 口径场
分 类 号:TN956[电子电信—信号与信息处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.249