基于0.13μm CMOS工艺的14位50MS/s流水线ADC  

A 14 bit 50MS/s Pipelined ADC in 0.13μm CMOS Process

作　　者：詹勇 石红[1] 魏娟 周晓丹 郭亮 ZHAN Yong;SHI Hong;WEI Juan;ZHOU Xiaodan;GUO Liang(Sichuan Institute of Solid-State Circuits, China Electronics Technology Group Corp. , Chongqing 400060, P. R. Chin)

机构地区：[1]中国电子科技集团公司第二十四研究所,重庆400060

出　　处：《微电子学》2018年第2期151-155,共5页Microelectronics

摘　　要：设计并实现了一种14位50 MS/s流水线ADC。采用无采保放大器的前端电路和运放共享技术,在达到速度及精度要求的同时降低了功耗。该流水线ADC采用0.13μm标准CMOS工艺实现,芯片尺寸为2.7mm×2.1mm。在电源电压为1.2V、采样速率为50 MS/s、模拟输入信号频率为28 MHz的条件下进行测试。结果表明,该ADC的功耗为91.2mW,SFDR为82.39dBFS,SNR为72.45dBFS,SNDR为71.13dB,ENOB为11.52bit,THD为-81.28dBc,DNL在±1LSB以内,INL在±3LSB以内,品质因子FOM为0.62pJ/step。A 14 bit 50-MS/s pipelined ADC was designed and implemented.Due to the fact that the proposed ADC was based on the techniques of SHA-less and op-amp sharing,the required speed and precision could be achieved while the power consumption was reduced.This ADC was fabricated in a 0.13μm standard CMOS process with a chip size of 2.7 mm×2.1 mm.The implemented ADC was measured under different input frequencies with a sampling rate of 50 MS/s.The results showed that it consumed 91.2 mW from a 1.2 V supply.At 28 MHz input,the measured SFDR,SNR,SNDR,ENOB,and THD of the ADC was 82.39 dBFS,72.45 dBFS,71.13 dB,11.52 bit,-81.28 dBc respectively.The measured DNL and INL were optimized to±1 LSB and ±3 LSB respectively,and the FOM was 0.62 pJ/step.

关 键 词：流水线ADC 无采保放大器 运放共享 

分 类 号：TN432[电子电信—微电子学与固体电子学]