车刀表面微孔织构耐磨性能分析  

Study on Abrasion Resistance of Turning Tool with Surface Microtexture

作　　者：蔡倩倩[1] 于占江[1] 杜强[1] 许金凯[1] 于化东[1] 李一全[1] Cai Qianqian;Yu Zhanjiang;Du Qiang;Xu Jinkai;Yu Huadong;Li Yiquan

机构地区：[1]长春理工大学

出　　处：《工具技术》2018年第3期95-97,共3页Tool Engineering

基　　金：长春理工大学青年基金(000552)

摘　　要：利用激光加工技术在硬质合金刀具表面制备出不同直径大小的微坑结构。通过正交切削Ti6Al4V合金研究有织构和无织构刀具对刀具耐磨损性能和被加工表面粗糙度的影响。结果表明:随着激光功率的增加,微坑直径和坑深呈增大趋势;织构刀具的耐磨损性能优于无织构刀具;织构刀具的被加工表面粗糙度低于无织构刀具;织构刀具微坑直径对刀具耐磨损性能和被加工表面粗糙度的影响存在一个临界值。The micro-pits with different diameters are prepared by laser processing technology in the surface of carbide turning inserts. The influences of the microtextures on the tool abrasion resistance and the machined surface roughness are investigated through orthogonal cutting Ti6 Al4 V alloy. The results show that,with the increase of the laser power,the diameter and the depth of the micro-pits is increased. And the tool with microtexture shows a better abrasion resistance performance than the tool without microtexture,the surface roughness got with a microtexture tool is lower than that of the one without microtexture. When analyzing the influences of the micro-pit diameters on the tool abrasion resistance and the surface roughness,a critical value of the micro-pit diameter is existed.

关 键 词：微织构 硬质合金车刀 正交切削试验 耐磨性能 表面粗糙度 

分 类 号：TG712[金属学及工艺—刀具与模具] TG580