硬质合金刀具铣削高硅铝合金CE11的摩擦特性研究  

Study on Friction Characteristics of Carbide Milling Tool for Machining High Silicon Aluminum Alloy CE11

作　　者：刘小莹[1] 郭佳[1] 陈宏[1] 周利平[1] 陈朴[1] LIU Xiaoying;GUO Jia;CHEN Hong;ZHOU Liping;CHEN Pu(Mechanical Engineering College, Xihua University, Chengdu Sichuan 610039, China)

机构地区：[1]西华大学机械工程学院,四川成都610039

出　　处：《机床与液压》2018年第7期78-81,共4页Machine Tool & Hydraulics

基　　金：四川省科技厅应用基础研究计划项目(2015JY0276);教育部春晖计划项目(Z2016129);西华大学重点科研基金资助项目(Z1020212)

摘　　要：对高硅铝合金这一难加工材料的研究现状进行了分析,并确定采用铣削加工摩擦实验方法进行硬质合金刀具的摩擦学行为研究。建立试验平台及试验方案,并进行铣削力和铣削温度的试验数据采集,求解刀-屑摩擦因数;根据摩擦因数分析主轴转速、摩擦时间和摩擦接触区温度等因素对刀具摩擦特性的影响。研究结果对改善高硅铝合金材料的切削加工性能具有重要指导意义,并为后续各种涂层刀具的摩擦磨损特性研究提供了依据。The study status of high silicon aluminum alloy is analyzed at home and abroad,and the milling experiments for friction test are determined to be used for study of the tribological behavior of carbide tool. The experimental platform and test plan were established,and the cutting forces as well as the temperatures of contact surfaces were measured. The average friction coefficient was calculated by the cutting forces data gained. The average friction coefficient was used to analyze the effects of the spindle speed,the time and the temperature on friction characteristics. The study has important guiding significance for improving the cutting performance of high silicon aluminum alloy,and lays the foundation for the subsequent studies on friction and wear characteristics of various coated cutting tools.

关 键 词：高硅铝合金CE11 硬质合金铣刀 摩擦因数 摩擦特性 

分 类 号：TH117.1[机械工程—机械设计及理论]