UMo／Zr单片式燃料板堆内热力耦合行为研究  

Research on In-Pile Thermal-Mechanical Behavior of UMo/Zr Monolithic Fuel Plates

作　　者：孔祥喆 丁淑蓉 田旭 Kong Xiangzhe;Ding Shurong;Tian Xu(Institute of Mechanics and Computational Engineering, Department of Aeronautics and Astronautics, Fudan University, Shanghai, 200433, Chin)

机构地区：[1]复旦大学航空航天系,力学与工程仿真研究所,上海200433

出　　处：《核动力工程》2018年第2期109-113,共5页Nuclear Power Engineering

基　　金：国家自然科学基金(11572091,11772095);国家重点研发计划(2016YFB0700103);中国核动力研究设计院核反应堆系统设计技术重点实验室项目

摘　　要：UMo/Zr单片式燃料板在堆内辐照环境下会经历复杂的多场耦合及多尺度关联的行为。针对均匀辐照的堆内工况条件,建立了对UMo/Zr单片式燃料板的堆内行为进行多尺度模拟的方法,并计算分析了元件的温度场、变形和主要应力场随燃耗演化的规律,获得了芯体与包壳界面层间应力的分布与演化规律。研究结果表明,芯体的最高温度会随着辐照时间持续增长;芯体厚度随着辐照时间而增大,在靠近芯体的边界附近厚度增长较多,与辐照后相关检测结果相符;芯体的Mises应力要远小于包壳中的Mises应力;芯体和包壳界面正应力最大值位于靠近芯体角部的位置,界面角部区域较大的界面拉应力易导致此处首先产生界面破坏。UMo/Zr monolithic fuel plates experience complex multi-field-coupling and multi-scale behavior during the in-pile radiation. In this study, the method of multi-scale simulation of the in-pile behavior in the UMo/Zr monolithic fuel plate under a homogeneous irradiation condition is built. The distributions and evolutions of the temperature field, the strain field and stress field, and the interracial stress between the cladding and the fuel meat are calculated and analyzed. The research results indicate that the peak temperature increases with the irradiation time, the thickness of the plate increases with the irradiation time, and the peak value occurs near the edge of the fuel meat; the Mises stress in the fuel meat is far less than that in the cladding; and the maximum interfacial normal stress is located near the comer of the fuel meat, where the tensile stress may cause interracial failure.

关 键 词：有限元法 单片式燃料元件 辐照肿胀 界面应力 

分 类 号：TL352[核科学技术—核技术及应用]