采用S-Lay铺设的海底管道终端安装分析  

Installation Analysis of S-Lay Pipeline End Termination

作　　者：邢广阔 王长涛 王凤云 张美荣 张蓬菲 XING Guang-kuo;WANG Chang-tao;WANG Feng-yun;ZHANG Mei-rong;ZHANG Peng-fei(Offshore Oil Engineering Co. , Ltd. , Tianjin 300451, China)

机构地区：[1]海洋石油工程股份有限公司,天津3004511

出　　处：《海洋工程装备与技术》2018年第2期129-132,共4页Ocean Engineering Equipment and Technology

基　　金：国家科技重大专项(2016ZX05057)

摘　　要：采用S-Lay铺设的海底管道终端(PLET)在通过托管架的过程中会承受海管的拉应力和弯曲变形产生的弯曲应力。采用有限元分析软件ANSYS,建立PLET过托管架的有限元模型,对采用S-Lay铺设PLET通过托管架的不同位置进行计算分析。研究发现最大应变发生在PLET与海管相连位置附近,为采用S-Lay铺设的PLET通过托管架能力分析提供了依据。The pipeline end termination （PLET） laid by S-lay will bear tensile stress from the pipeline and bending stress caused by bending deformation, when it gets through the stinger. Using the finite element analysis software ANSYS, we establish the finite element model of PLET passing through the stinger and carry out calculations and analyses for different positions of the stinger. It is found that the maximum strain appears near the location of the connection between PLET and pipeline. This will provide basis for the capability analysis of S-lay PLET passing through the stinger.

关 键 词：管道终端(PLET) 海底管道 托管架 S-Lay铺设 ANSYS 有限元 

分 类 号：TE53[石油与天然气工程—油气田开发工程]