基于LabVIEW的智能温湿度检测系统  

Temperature and Humidity Detection System Based on LabVIEW

作　　者：周细凤[1,2] 谢波 张平华 ZHOU Xi-feng;XIE Bo;ZHANG Ping-hua(College of Electrical ＆ Information Engineering, Hunan Institute of Engineering, Xiangtan 411101, China;School of Electronic Engineering, Hunan College of Information, Changsha 410200, China;Hunan Provinical Key Laboratory of Wind Generator and Its Cantrol, Hunan Institute of Engineering, Xiangtan 411104, China)

机构地区：[1]湖南工程学院电气信息学院,湘潭411101 [2]湖南工程学院风力发电机组及控制湖南省重点实验室,湘潭411104 [3]湖南信息职业技术学院电子工程学院,长沙410200

出　　处：《湖南工程学院学报（自然科学版）》2018年第1期6-9,共4页Journal of Hunan Institute of Engineering(Natural Science Edition)

基　　金：2015湖南工程学院教学改革研究项目;湖南工程学院博士启动基金(16RC007);湖南省教育科学"十三五"规划省级一般资助课题(XJK016BXX004);湖南省教育厅科学研究项目(15C0982)

摘　　要：针对传统温湿度监测数据存储、读取不方便且操作复杂等问题,提出了基于LabVIEW的智能温、湿度检测系统.该系统将传感器DHT11所采集到的温度、湿度数据传送至单片机的I/O引脚,再通过虚拟串口将带有时间戳的数据传输至上位机,上位机程序采用LabVIEW实现,可以数字和波形两种方式实时显示温度、湿度,而且可触发温、湿度报警信号,并能以Excel表格存储或者调用历史数据.所设计的系统成本低廉,界面友好,操作方便,功能易于扩展,具有良好的推广应用前景.In order to solve the problems such as inconvenience of data storage or reading,and complex operation,an intelligent temperature and humidity monitoring system using LabVIEW is designed in the paper.The readings of temperature and humidity gathered by the sensors DHT11 are transmitted to the I/O pins of SCM,and then to the HMI designed by the LabVIEW through the Virtual Serial Port Driver.The temperature and humidity can be shown by waveform or digital in real time.The warning signals can be sent.And finally,the temperature and humidity dates can be stored or read by EXCEL.In short,the designed system has characteristics of low cost,being user-friendly,easy to operate and strong ex-pansibility.So it has a good potential application future.

关 键 词：检查系统 LABVIEW 温、湿度 单片机 

分 类 号：TM935[电气工程—电力电子与电力传动]