基于CAE分析的铝合金基座压铸工艺优化设计  

Optimization Design of Die Casting Process for Aluminum Alloy Base Based on CAE Analysis

作　　者：李平[1,2] 魏建华 李锋军 赵俊岩[4] LI Ping;WEI Jian-hua;LI Feng-jun;ZHAO Jun-yan(School of Material Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, Henan, China;Henan International Joint Research Laboratory for High-Performance Light Metallic Materials and Numerical Simulations Jiaozuo 454000, Henan, China;China Yituo Group Co., Ltd., Luoyang 471004, Henan, China;Jiaozuo Shenhua Heavy Machinery Manufacturing Co., Ltd., Jiaozuo 454000, Henan, China)

机构地区：[1]河南理工大学材料科学与工程学院,河南焦作454000 [2]河南省高性能轻金属材料及数值模拟国际联合实验室,河南焦作454000 [3]中国一拖集团有限公司,河南洛阳471004 [4]焦作神华重型机械制造有限公司,河南焦作454000

出　　处：《铸造》2018年第5期420-423,共4页Foundry

基　　金：河南省高校基本科研业务费专项资金资助(NSFRF170502)

摘　　要：在铝合金基座压铸件开发过程中,利用华铸CAE软件对设计的压铸工艺方案进行充型模拟分析及优化。结果表明,原始方案一个内浇口的金属液充型方式易导致铸件型腔底部和顶部圆筒处出现卷气和夹渣等现象。增设一条辅助内浇口的优化方案充型过程较为合理,可以避免铸件底部和顶部圆筒处出现卷气和夹渣等缺陷。实际生产中铸件的合格率在98%以上。During the development of die castings such as aluminum alloy base, the die casting process was simulated and optimized by the InteCAST software. The results show that the original scheme in which the molten aluminum was filled with one ingate easily causes air entrapment and entrapped slag at the bottom of the aluminum alloy base and in the top cylinder of the base. However, the optimization scheme in which an auxiliary ingate is added is more reasonable, and the above casting defects in the original scheme may be effectively avoided. In actual production, the qualified rate of castings is above 98%.

关 键 词：华铸CAE 铝合金基座 压铸工艺 优化设计 

分 类 号：TG249.2[金属学及工艺—铸造]