热能储存材料承载体钎焊  

R&D of brazing carrier of heat storage materials

作　　者：龙飞[1] 何鹏[1,2] 路全彬[2] 林铁松[1] 

机构地区：[1]哈尔滨工业大学先进焊接与连接国家重点实验室,哈尔滨150001 [2]郑州机械研究所新型钎焊材料与技术国家重点实验室,郑州450001

出　　处：《焊接》2018年第4期38-41,共4页Welding & Joining

基　　金：河南省科技创新杰出人才项目(174200510010)

摘　　要：从传统能源储量有限的大背景出发,简述了太阳能的战略意义,介绍了热能储存材料的类型、作用及其承载体的结构及成型方式。以钨、钼和TZM合金为例,介绍了承载体基体的理化性质,引出了可用于钎焊热能储存材料承载体的钎料体系,并对他们的可行性进行了系统评价,提出了通过调控元素来获取理想的钎料熔点与接头组织这一解决目前技术瓶颈的方案。介绍了热能储存材料承载体所需要用到的钎焊设备——真空钎焊炉,并对钎焊炉的种类进行了详细探讨。研究表明,感应钎焊具有加热速度快、能源利用率高的特点,针对感应钎焊温度不能精确控制的缺点,引入模糊控制来实现控温,具有良好的发展前景。Based on the background of traditional energy reserves,the strategic significance of solar energy was briefly described,the type and function of heat storage materials and their structure and forming method were introduced. Being taken the tungsten,molybdenum and TZM alloys as an example,the physical and chemical properties of the matrix of the carrier were introduced,and the brazing filler metals that can be used to braze the heat storage material carrier were drawn out and their feasibility was systematically evaluated. The solution to the current technical bottleneck was proposed by regulating elements to get the ideal melting point of filler metals and the microstructures of joints. After that,the brazing equipment-vacuum brazing furnace needed for the heat storage material carrier was introduced,and the type of brazing furnace was discussed in detail. The results show that the induction brazing has the characteristics of fast heating speed and high energy utilization rate. Aiming at the shortcomings that the induction brazing temperature can not be precisely controlled,fuzzy control can be introduced to achieve temperature control,and which has a good development prospects.

关 键 词：热能储存材料 钨钼合金 真空感应钎焊 

分 类 号：TG425[金属学及工艺—焊接]