表面活性剂和碱对Cr^(3+)聚丙烯酰胺凝胶成胶效果的影响及作用机理  

Effects of Surfactant and Alkali on the Gelation Performance of Cr^(3+) With HPAM and Its Action Mechanism

作　　者：刘进祥[1] 卢祥国[1] 张云宝[1,2] 曹伟佳 谢坤[1] 潘赫[1] 赵劲毅[3] 李国桥[3] LIU Jinxiang1,LU Xiangguo1,ZHANG Yunbao1,2,CAO Weijia1,XIE Kun1,PAN He1,ZHAO Jinyi3,LI Guoqiao(1Key Laboratory of Enhanced Oil Recovery o f Education Ministry,Northeast Petroleum University,Daqing 163318,China;2.Bohai Oilfield Research Institute of China National Offshore Oilfield Corporation Limited-Tianjin,Tianjin 300452,China;3.No.2 Oil Production Plant of Daqing Oilfield,Daqing 163414,Chin)

机构地区：[1]东北石油大学提高油气采收率教育部重点实验室,黑龙江大庆163318 [2]中海石油(中国)有限公司天津分公司渤海石油研究院,天津300452 [3]大庆油田采油二厂,黑龙江大庆163414

出　　处：《石油学报（石油加工）》2018年第3期614-622,共9页Acta Petrolei Sinica(Petroleum Processing Section)

基　　金：国家自然科学基金面上项目(51574086);"十三五"重大专项子课题(2016ZX05058003-010)资助

摘　　要：在三元(或二元)复合驱过程中,调剖剂不可避免与表面活性剂和碱接触,因此碱和表面活性剂的性能可能会对调剖剂的性能造成影响。室内采用黏度计、动态光散射仪、扫描电镜和驱油实验装置,研究了碳酸钠、石油磺酸盐和脂肪醇聚氧乙烯聚氧丙烯醚对Cr^(3+)聚合物凝胶调剖剂的黏度、分子聚集体尺寸、分子聚集体形态和调剖效果的影响。结果表明,石油磺酸盐和脂肪醇聚氧乙烯聚氧丙烯醚对Cr^(3+)聚丙烯酰胺凝胶的黏度和分子聚集体尺寸几乎不影响;而Na_2CO_3的加入使Cr^(3+)聚合物凝胶不成胶,且Cr^(3+)聚丙烯酰胺凝胶成胶后加入Na_2CO_3会发生破胶现象,分子聚集体尺寸大幅下降,聚集体形态从大的团块状变成小的团块状,驱油过程中封堵效果明显变差。进一步分析发现,在碱性条件下,Cr^(3+)聚丙烯酰胺凝胶难以发生交联反应,即使发生了交联也会发生解交联。In the process of ASP（or binary compound）flooding,the contact between profile control agents and surfactant and alkali is inevitable.Thus,alkali and surfactant significantly affect the performance of profile control agent. The effects of Na2CO3, petroleum sulfonate and polyoxyethylene polyoxypropylene ether on the viscosity,the size of molecular aggregate,molecular aggregate morphology and profile control performance of Cr^（3＋）HPAM gel profile control agent were studied,by using viscometer,dynamic light scattering,scanning electron microscopy and oil displacement experimental device in laboratory.Results show that the gelation effect of petroleum sulfonate and polyoxyethylene polyoxypropylene ether on Cr^（3＋）HPAM gel is weak.In the presence of Na2CO3,the Cr^（3＋）HPAM gel can not be formed and Cr^（3＋）HPAM gel becomes destroyed after adding Na2CO3.The size of molecular aggregates decreases significantly,the aggregate morphology changes from large agglomerates to small agglomerates.The sealing effect during the process of oil displacement deteriorates obviously.By further analysis,we confirm that under the alkaline conditions,Cr^（3＋）HPAM gel is difficult to happen via the cross-linking reaction.

关 键 词：表面活性剂 碱 Cr3+聚丙烯酰胺凝胶 分子聚集体形态 成胶效果 作用机理 

分 类 号：TE35[石油与天然气工程—油气田开发工程]