基于新型E类放大器的磁耦合谐振式无线传输在负载变化时的效率  

Efficiency of Magnetically Coupled Resonant Wireless Transmission Based on the New Class E Amplifier under Varying Load

作　　者：曹少卿 闫荣格[1] 郭晓婷 陈俊杰 郜玉香 CAO Shao-qing;YAN Rong-ge;GUO Xiao-ting;CHEN Jun-jie;GAO Yu-xiao(State Key Laboratory of Reliability and Intelligence of Electrical Equipment, Key Laboratory of Electromagnetic Field andElectrical Apparatus Reliability, Hebei University of Technology, Tianjin 300130, China)

机构地区：[1]河北工业大学省部共建电工装备可靠性与智能化国家重点实验室,电磁场与电器可靠性重点实验室,天津300130

出　　处：《科学技术与工程》2018年第14期30-36,共7页Science Technology and Engineering

基　　金：国家自然科学基金(51777054); 省部共建电工装备可靠性与智能化国家重点实验室(河北工业大学)项目资助

摘　　要：研究了在负载变化时的新型E类放大器磁耦合谐振式无线电能传输系统的效率。首先,对新型E类放大器进行了理论分析和数学建模。然后,通过在新型E类放大器上采用前端阻抗转换器实现了放大器的开关管的ZVS、ZDS条件;并采用后端阻抗转换器实现了负载变化时效率的稳定性。最后,通过MATLAB对该系统进行仿真研究。仿真结果表明,在新型E类放大器中加入双端阻抗转换器后,放大器在负载变化的情况下,负载效率更加稳定。The efficiency of a new class E amplifier magnetically coupled resonant wireless power transmission system is studied when the load changes. Firstly,the theoretical analysis and mathematical modeling of the new class E amplifier are carried out. Then,the ZVS and ZDS conditions of the switch of the amplifier are realized by adopting the front-end impedance converter in the new class E amplifier,and the efficiency stability of the switching load is realized by using the back-end impedance converter. Finally,the simulation of the system is carried out by MATLAB. The simulation results show that the load efficiency of the amplifier is more stable under the condition of load change after adding double ended impedance converter in the new class E amplifier.

关 键 词：新型E类放大器 阻抗转换器 无线电能传输 ZVS ZDS 

分 类 号：TM724[电气工程—电力系统及自动化]