牛津纺的织造工艺优化  

Weaving Process Optimization of Oxford Cloth

作　　者：闫小兵[1] 盛翠红[1] 张一心[1] YAN Xiaobing;SHENG Cuihong;ZHANG Yixin(Xi＇an Polytechnic University,Shaanxi Xi＇an,710048)

机构地区：[1]西安工程大学,陕西西安710048

出　　处：《棉纺织技术》2018年第6期56-58,共3页Cotton Textile Technology

摘　　要：总结一款牛津纺产品的织造工艺优化效果。概述了产品的生产基本条件;介绍了浆纱工序中的浆料配方和浆纱效果;以织机工艺参数为重点,分析了引纬参数、开口时间、稀密路等工艺调整过程,并总结了其他织机工艺;同时,对一些织物疵点的预防措施进行了总结。结果表明:通过工艺优化,最终产品顺利生产,织机效率达92%以上,入库一等品率在99.7%以上。认为:通过优化织机工艺,可以实现牛津纺产品提质增效的较好效果。The optimization of weaving process for oxford cloth was summarized.The basic conditions of oxford cloth were summarised.The sizing instruction and sizing effect in sizing process were introduced.With the emphasis on the weaving parameters,the adjustment process of the weft insertion parameters,shed timing and weft crackiness were analyzed and summarized.At the same time,the preventive measures for some fabric defects were summarized.The results show that through the process optimization,the final products were successfully produced,the loom efficiency was reached above 92%,the first-class product rate which was reached above99.7%.It is considered that better quality and efficiency of oxford cloth can be achieved by optimizing the weaving process.

关 键 词：牛津纺 经纱 浆料配方 上浆率 喷气织机 上机张力 开口时间 

分 类 号：TS105.411[轻工技术与工程—纺织工程]