三维激光扫描技术在装配式架线施工中的应用  

Application of 3D Laser Scanning Technology in Assembly Line Construction

作　　者：景维立 JING Weili(Beijing MAG Tianhong Science ＆ Technology Development Co. Ltd., Beijing 100043, China)

机构地区：[1]北京麦格天渱科技发展有限公司,北京100043

出　　处：《测绘通报》2018年第6期153-155,共3页Bulletin of Surveying and Mapping

摘　　要：架线施工在送变电工程中是非常重要的一个环节,传统方式是采用弧垂法,但是效率很低,无法在跨越高速或高铁普及的条件下应用,需要应用装配式架线技术,目前经过验证的是通过全站仪配合棱镜测量的方式,但是也存在安全隐患。本文结合实际项目,探索研究三维激光扫描技术在装配式架线施工中的应用。Powerline construction is a very important part in the power transmission and transformation project.The traditional method is through the arc-sag, but the efficiency is very low and cannot be widely used when passing across high-speed or high-speed railways.This requires using of prefabricated wire-laying technology.The total station instrument with the prism measurement method was proved, but there are also hidden dangers.This article combines the actual project, focus on the application of three-dimensional laser scanning technology in the assembly powerline construction.

关 键 词：三维激光扫描 装配式架线 SX10 TRIMBLE RealWorks 

分 类 号：P23[天文地球—摄影测量与遥感]