检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:季英俊 程崇虎[2] JI Ying-jun;CHENG Chong-hu(College of Electronic Science and Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210003, China;College of Telecommunication and Information Engineering, Nanjing University of Posts and Telecommunications, Nanjing 210003, China)
机构地区:[1]南京邮电大学电子科学与工程学院,江苏南京210003 [2]南京邮电大学通信与信息工程学院,江苏南京210003
出 处:《电子设计工程》2018年第11期95-99,共5页Electronic Design Engineering
摘 要:本文研究紧密相邻的微带贴片天线间的耦合消除方法,思路是通过在两个天线间设计一种微带交指线结构,使得原本从一个天线到另一个天线的耦合场,在经过微带交指线结构后得到减小甚至滤除。本文以两个工作在5.8 GHz、同轴线底部馈电的共介质和地的微带贴片天线为例,在两天线之间增加一个微带交指线结构。结合电磁仿真软件HFSS,对去耦结构效果进行了仿真验证,仿真结果表明以5.8 GHz为中心,30 dB去耦带宽可达到33 MHz,带宽内隔离度可达49.5 dB。最后比对仿真与实测数据,证实该方法确实具有良好的去耦效果。In this paper,we study the decoupling method between compact microstrip patch antennas.The idea is to design a microstrip interdigital line structure between two antennas,leading the coupling field which originally from one antenna to the other,get smaller or eliminated,after going through microstrip interdigital line. The two probe-fed patches operate at 5.8GHz with a common dielectric substrate and ground plane,a interdigital line structure is placed between two antennas. Combined with the electromagnetic simulation software HFSS,the effect of decoupling structure was simulated,the simulation results shows that 30 dB decoupling bandwidth is 33 MHz,isolation can be up to 49.5dB within the 30 dB bandwidth. Finally,the simulation and measured data show that the proposed method has good decoupling effect.
分 类 号:TN97[电子电信—信号与信息处理]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28