形貌可控Eu^(3+)掺杂氧化钼锌水合物的发光性能  

Photoluminescence Performance of Morphology-Tunable Eu^(3+)-doped Zinc Molybdenum Oxide Hydrate

作　　者：马青兰[1,2] 马树清 邵海宝 邓洪海[1,2] 王志亮[1,2] 黄静[1,2] 尹海宏[1,2] 张振娟[1,2] Ma Qinglan;Ma Shuqing;Shao Haibao;Deng Honghai;Wang Zhiliang;Huang Jing;Yin Haihong;Zhang Zhenjuan(School of Electronics and Information, Nantong University, Nantong, Jiangsu 226019, China;Watang Teaching Affairs Department, Xingxian Bureau of Education, Xingxian, Shanxi 033600, China;School of General Microelectronies, Nantong University, Nantong, Jiangsu 226000, China)

机构地区：[1]南通大学电子信息学院,江苏南通226019 [2]南通大学通科微电子学院,江苏南通226000 [3]兴县教育局瓦塘教办,山西兴县033600

出　　处：《光学学报》2018年第6期251-258,共8页Acta Optica Sinica

基　　金：国家自然科学基金(11604028;61573201;61505090);江苏省高校自然科学基金(15KJA510004;15KJB150023;17KJA470007);江苏省"六大人才高峰"高层次人才项目(2016-XCL-052);江苏高校品牌专业建设工程资助项目(PPZY2015B135);南通大学-南通智能信息技术联合研究中心开放课题基金(KFKT2016A05);南通市科技计划项目(GY12016024)

摘　　要：通过共沉淀法,在室温下合成了Eu^(3+)掺杂氧化钼锌水合物的前驱体。研究了烧结温度对该前驱体的微结构和光致发光性能的影响。研究结果表明,在约400℃温度下,通过低成本地烧结Eu^(3+)掺杂水合物前驱体,可得到Eu^(3+)掺杂的纳米ZnMoO_4结构。The precursor of Eu3＋-doped zinc molybdenum oxide hydrate is synthesized at the room temperature by using the co-precipitation method. The influences of sintering temperature on the microstructure and photoluminescence performance of this precursor are investigated.The research results show that the Eu3＋-doped ZnMoO4 nanostructure can be obtained by sintering the precursor of Eu3＋-doped zinc molybdenum oxide hydrate with a low cost and at about the temperature of 400 ℃.

关 键 词：材料 ZnMoO4 烧结 形貌 光致发光 

分 类 号：O436[机械工程—光学工程]