基于FMECA方法的冲压模具故障模式及危害性分析  

The Fault Mode and Its Hazard Analysis of Stamping Die based on FMECA

作　　者：苏艳红 赵永翔[1] 门正兴[2] 朱正兴[2] 马亚鑫 SU yanhong;ZHAO yongxiang;MEN zhengxing;ZHU zhengxing;MA yaxin(Southwest Jiaotong University, Chengdu 610031, China;Chengdu Aeronautic Polytechnic, Chengdu 610021, China)

机构地区：[1]西南交通大学,成都610031 [2]成都航空职业技术学院,成都610021

出　　处：《成都航空职业技术学院学报》2018年第2期50-52,共3页Journal of Chengdu Aeronautic Polytechnic

摘　　要：针对典型冲孔落料复合模具,应用故障模式影响及严重度矩阵分析(FMECA)方法,开展了模具设计、制造和使用中的故障逻辑关系及影响研究。结果表明冲孔落料复合模具故障主要由制造误差造成,来自于工作零件、定位零件、卸料与紧固类零件冲孔落料复合模具的大部分故障,都能在模具装配或试模阶段发现。装配修模及试模调试工作有利于减少冲压模具故障。Taking the typical punching and blanking compound die as the study object, by using FMECA（Fault Matrix Effect Analysis and Severity Matrix Analysis）, the fault logic relation and influence study in the process of mould design, manufacture and use are carried out. The result shows that stamping die failures are mainly caused by the manufacturing errors, and most of the faults from working parts, locating parts, unloading and fastening parts can be found in the mold assembly or test mode, so the repairing and debugging work is particularly important to reduce stamping die failure.

关 键 词：冲压模具 FMECA 故障模式 制造误差 

分 类 号：TG316[金属学及工艺—金属压力加工]