检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:李玉杰 李洪涛[1] 高山[1] 腾云[1] 和彦淼 刘通 LI Yujie;LI Hongtao;GAO Shan;TENG Yun;HE Yanmiao;LIU Tong(National Power Grid Corp GIS Equipment Operation and Maintenance Technology Laboratory(State Grid Jiangsu Electric Power Co.,Ltd.Research Institute),Nanjing 211103,China;China Electric Power Research Institute,Beijing 100192,China)
机构地区:[1]国家电网公司GIS设备运维检修技术实验室(国网江苏省电力有限公司电力科学研究院),江苏南京211103 [2]中国电力科学研究院有限公司,北京100192
出 处:《电力工程技术》2018年第4期121-125,共5页Electric Power Engineering Technology
基 金:国家电网公司科技项目(高压开关设备机械状态评估及故障诊断关键技术研究);中央高校基本科研业务费专项资金资助(2015JBM085)
摘 要:高压隔离开关异常发热是电力系统中长期存在的安全隐患。温升是评估隔离开关运行状态的一个重要指标,接触电阻值是表征导电回路联接是否良好的关键参数。隔离开关设备的温升主要受接触电阻控制,接触电阻值变化时,将引起隔离开关整体温度分布改变。文中针对隔离开关不同缺陷对隔离开关触头接触电阻和触头最大温升的影响进行相关试验,最终得到GW6B-252型隔离开关触头压力应该在400 N以上,且触头污秽对隔离开关温升影响最大的结论。The problem of overheating fault of highvoltage isolation switch has brought unavoidable safety hazard for powersystem. The temperature rise is an important index to evaluate the operation state of isolation switch. The contact resistancevalue is the key parameter to indicate whether the connection of the conducting circuit is good. The temperature rise of theisolator is mainly controlled by the contact resistance. When the contact resistance changes,the overall temperature distributionof the isolation switch changes. In this paper,the effects of different defects of the contact resistance and the maximumtemperature rise on the contacts of GW6B-252 isolation switch are studied. The conclusion is occurred that the contact pressureof the GW6B-252 should be above 400 N,and the fouling of the contact has the greatest influence on the temperature rise ofthe GW6B-252 isolation switch.
关 键 词:GW6B-252型隔离开关 触头温升 接触电阻 接触状态
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200