基于漂移阶跃恢复二极管开关的脉冲源仿真计算  

Simulation and calculation of pulsed power source based on drift step recovery diode switching

作　　者：王亚杰[1] 何鹏军[1] 荆晓鹏[1] 铁维昊[1] 解江远[1] 赵程光[1] Wang Yajie;He Pengjun;Jing Xiaopeng;Tie Weihao;XieJiangyuan;ZhaoChengguang(Xi＇an Electronic Engineering Research Institute,Xi＇an 710100,China)

机构地区：[1]西安电子工程研究所,西安710100

出　　处：《强激光与粒子束》2018年第9期86-91,共6页High Power Laser and Particle Beams

摘　　要：介绍了新型半导体开关漂移阶跃恢复二极管(DSRD)的工作原理和特性,总结了基于半导体开关器件的脉冲源的发展现状及应用。基于DSRD的等效模型,建立了其正反向泵浦电路的仿真模型,按照输出电压参数的要求,对主储能电感、初级储能电感的取值进行了仿真计算分析,并得到了主回路各元件参数的最优值。通过仿真分析了MOSFET漏源端寄生电容与限压并联电容对输出参数的影响,得到了限压并联电容最优值为0.2nF,通过计算与仿真得到隔直电容的最优值为100pF。研制了一款可连续输出的脉冲功率源,其重复频率为1 MHz,脉冲前沿等于680ps(20%~90%),电压幅值2kV,半高宽1.5ns。This paper describes the operation principle and characteristic of the drift step recovery diode （DSRD） , a new type of semiconductor switching, and summarizes the development and application of pulsed power source based on semiconductor switching. Based on the equivalent model of DSRD switching, it builds the simulation model of the forward and reverse pumping current circuit. Based on the output voltage, it simulates and calculates the main energy storage inductance and primary energy storage inductance, gets the optimum parameters of other components. It analyzes the value of the parallel capacitor and the MOSFET parasitic capacitor output parameter, and gets the optimum values of parallel capacitor and blocking capacitor. A pulsed power source was designed based on the DSRD. The source can work in continuous mode, with the amplitude above 2 kV, the rise time less than 680 ps（from 20% to 90%） , the FWHM about 1.5 ns and the working frequency more than 1 MHz.

关 键 词：漂移阶跃恢复二极管 泵浦电路 亚纳秒 高重频 

分 类 号：TN313[电子电信—物理电子学]