检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:洪浩群[1,2] 郭权南 邱楚濠 刘灏 张海燕[1,2] HONG Haoqun 1,2 ,GUO Quannan 1,QIU Chuhao 1,LIU Hao 1,ZHANG Haiyan 1,2(1 School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006;2 Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, GuangdongUniversity of Technology, Guangzhou 51000)
机构地区:[1]广东工业大学材料与能源学院,广州510006 [2]广东工业大学广东省功能软凝聚态物质重点实验室,广州510006
出 处:《材料导报》2018年第A01期220-225,共6页Materials Reports
基 金:国家自然科学基金(51276044);广东省科技计划项目(2014A010105047);广州市科技计划项目(201707010367)
摘 要:采用碱处理、硅烷偶联剂处理以及碱处理配合硅烷偶联剂处理等方式改性甘蔗渣(BF),采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)、扫描电镜(SEM)、X射线光电子能谱(XPS)、热重分析(TGA)以及力学性能测试等研究改性后BF结构的变化。结果表明,不同改性方法均明显改变了BF的结构及改性剂的键合方式。碱处理能够去除BF中的半纤维素等小分子聚合物以及部分非晶区的纤维素,导致BF热稳定性降低,结晶度上升。碱液浓度偏高以及碱处理时间过长会导致BF的纤维表面原纤化,虽然能增加与偶联剂反应的面积,但BF的强度大大下降,不利于BF的增强作用。因此,硅烷偶联剂处理的BF/PLA复合材料的相容性及力学性能最佳,其次为碱处理配合硅烷偶联剂处理的BF/PLA复合材料,最后为碱处理的BF/PLA复合材料。Methods in terms of alkali treatment,silane coupling agent modification and combination of alkali treatment and silane coupling agent modification were used to modify bagasse fiber(BF).Fourier transform infrared spectroscopy(FTIR),X-ray diffraction(XRD),scanning electron microscopy(SEM),X-ray photoelectron spectroscopy(XPS),thermogravimetry(TGA)and mechanical properties testing were used to characterize and analyze the structure and properties of modified BF.Results showed that the used methods changed the structure of BF and their bonding modes.Alkali treatment removed the small molecular compounds such as hemicellulose and parts of amorphous cellulose,resulting in the decreasing of thermal stability of BF and increasing of crystallinity of BF.The concentration of alkali solution was too high and the time for alkali treatment was so long that BF was fibrillated.The fibrillation of BF increased the reaction area of BF with the coupling agents,but decreased the strength of BF that is adverse to the reinforcement of BF.Therefore,BF/PLA composites modified by silane coupling agents demonstrated the best compatibility and mechanical properties,BF/PLA composites modified by combination of alkali treatment and silane coupling agents demonstrated better compatibility and mechanical properties,while BF/PLA composites modified by alkali treatment did not demonstrate good compatibility and mechanical properties in the compared BF/PLA composites.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117