大型灌溉管网配压式进排气阀排气特性  被引量:2

Exhaust performance of air inbreathe-release valve with principle of pressure distribution in large-scale irrigation pipe networks

在线阅读下载全文

作  者:杨夏威 陈松山 于贤磊 周明耀 YANG Xiawei;CHEN Songshan;YU Xianlei;ZHOU Mingyao(School of Hydraulic Energy and Power Engineering,Yangzhou University,Yangzhou,Jiangsu 225009,China;Jiangsu Surveying and Design Institute of Water Resources Co.Ltd.,Yangzhou,Jiangsu 225127,China)

机构地区:[1]扬州大学水利与能源动力工程学院,江苏扬州225009 [2]江苏省水利勘测设计研究院有限公司,江苏扬州225127

出  处:《排灌机械工程学报》2018年第10期975-980,共6页Journal of Drainage and Irrigation Machinery Engineering

基  金:国家科技支撑计划项目(2015BAD24B02-02)

摘  要:针对大型灌溉管网中气液相间工况下现有进排气阀无法连续排气的问题,结合配压原理,提出了一种新型配压式进排气阀结构设计方案,阐述了其结构组成和工作原理;采用数值模拟分析与物理模型试验相结合的方法对不同阀瓣开度、不同排气压差条件下阀门的排气过程及排气量进行了研究,探明了阀瓣开度和排气压差对主阀腔体内部气流流态以及阀门排气量的影响,对比实测值与数模结果偏差为0.08%~6.43%,验证了分析方法的合理性;试验测得了DN50新型进排气阀各压差工况的最大排气量,结果显示,其排气量分别高于相关行业标准中规定的该尺寸进排气阀在排气压差为0.035 MPa和0.070 MPa时应达到的排气量要求达27.31%和21.71%,排气性能良好.To solve the problem that common air inbreathe - release valves cannot exhaust continuously under the condition of gas and liquid interval in large-scale irrigation pipe networks, a new type of air inbreathe- release valve with principle of pressure distribution was designed. Numerical simulation and physical modeling test were used to study on exhaust process and air displacement under the condi- tions of different valve openings and different exhaust pressure differences. The effects of valve opening degree and exhaust pressure difference on internal flow in the main valve cavity and valve exhaust vo- lume were verified. Deviations of measured values and numerical results are between 0.08% and 6.43%, which verifies the correctness of the numerical simulation. The physical test measures the maximum exhaust volume of new DNS0 air inbreathe - release valve. The exhaust volumes of new air inbreathe -release valve exceed 27.31% and 21.71% of the rela ted industry specifications respec- tively when the exhaust pressure difference is 0. 035, 0. 070 MPa. Its exhaust pefformance is good.

关 键 词:进排气阀 配压原理 结构设计 数值模拟 排气特性 

分 类 号:S277.9[农业科学—农业水土工程]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象