基于Ansys和Motor-CAD对交流伺服电动机性能的研究  

Study on the Performance of Alternating Current Servomotor Based on Ansys and Motor-CAD

作　　者：陈金学 赵飞 朱志能 谭耳 崔浪浪 CHEN Jinxue;ZHAO Fei;ZHU Zhineng;TAN Er;CUI Langlang(Guizhou Aerospace Linquan Motor Co.,Ltd.,Guiyang 550081,China;National Engineering Research Center for Small and Special Precision Motors,Guiyang 550081,China)

机构地区：[1]贵州航天林泉电机有限公司,贵州贵阳550081 [2]国家精密微特电机工程技术研究中心,贵州贵阳550081

出　　处：《电机与控制应用》2018年第7期51-55,共5页Electric machines & control application

摘　　要：基于某型号导弹发射装置电机的设计指标要求,运用Ansys有限元分析软件及Motor-CAD热分析软件分别进行性能优化分析,得出合理的设计方案。通过实测数据的验证得出:方案设计的准确率可达到93.5%以上,电机表面温升最大为19.2 K,与仿真值接近,方案设计合理。Based on the motor design parameters of a certain type missile launch device,using of performance optimization analysis finite element analysis software Ansys and the Motor CAD thermal analysis software,a reasonable design scheme was given. And the validation of the measured data showed that the scheme design of accuracy could reach more than 93.5%,maximum surface temperature rise of motor was 19.2 ℃,and the simulation value close to the scheme design was reasonable.

关 键 词：交流电动机 Motor-CAD 输出性能 热分析 

分 类 号：TM301.2[电气工程—电机]