适用于高扬程的贯流泵设计及试验  

An Experimental Analysis of High-lift Tubular Pumps

作　　者：赵文龙[1] 周大庆[1] 郑源[1] 戴启璠 王宏图[2] 梁豪杰[2] 孟小敏[2] WANG Hong-tu;LIANG Haoojie;MENG Xiao-min(College of Energy and Electrical Engineering,Hohai University,Nanjing 211100,China;Jiangsu Irrigation Canal Management Office,Huaian 223200,Jiangsu Province,China)

机构地区：[1]河海大学能源与电气学院,南京211100 [2]江苏省灌溉总渠管理处,江苏淮安223200

出　　处：《中国农村水利水电》2018年第7期138-141,共4页China Rural Water and Hydropower

基　　金：江苏省水利科技项目(2017026)

摘　　要：贯流泵具有装置效率高、结构紧凑、平面尺寸小、水力性能好等特点。本研究运用CFD数值模拟方法,设计适用于7~10 m高扬程的定桨式灯泡贯流泵,并重点针对叶轮进行优化设计。分析对比了不同方案的泵装置外特性、叶片静压分布等。最后结合模型试验验证高扬程贯流泵数值模拟优化设计的可靠性。从而得出结论,所设计的最优贯流泵设计扬程为8.22 m,装置效率为83.45%,叶轮效率为91.46%,高效区范围较广。模型试验最高效率点为83.22%,设计扬程下效率为81.98%,误差范围较小。可表明数值模拟对贯流泵的性能预测精度较高,同时验证优化设计的有效性。The tubular pump has the characteristics of high efficiency,compact structure,small size,good hydraulic performance and so on.In this study,the CFD numerical simulation method is used to design the tubular pump which is suitable for 7 ~ 10 m high lift,and the optimization of the impeller is focused. The characteristics and blade static pressure distribution of different schemes are analyzed and compared. Finally,the reliability of the numerical simulation optimization design of the high-lift tubular pump is verified by the model test results. The conclusion is that the design head of the tubular pump is 8.22 m,the efficiency of the device is 83.45%,the impeller efficiency is 91.46%,and the efficiency range is wider. The maximum efficiency point of model test is 83.22%,the design head efficiency is 81.98%,and the error range is small. The results show that the performance prediction accuracy of the tubular pump is high,and the validity of the optimization design is verified.

关 键 词：贯流泵 数值模拟 优化设计 模型试验 

分 类 号：TV675[水利工程—水利水电工程]