方坯软接触电磁连铸结晶器内三维电磁场的数值模拟  

3-D NUMERICAL SIMULATION OF HIGH FREQUENCY ELECTROMAGNETIC FIELD IN SOFT CONTACT CONTINUOUS CASTING MOLD

作　　者：那贤昭[1] 张兴中[1] 仇圣桃[1] 干勇[1] 

机构地区：[1]钢铁研究总院连铸技术国家工程研究中心,北京100081

出　　处：《金属学报》2002年第9期947-951,共5页Acta Metallurgica Sinica

基　　金：国家自然科学基金资助项目59734080

摘　　要：通过有限元法三维数值模拟,对方坯连铸软接触结晶器系统中的电磁参数进行了计算.得到磁感应强度、电磁体积力、感应涡流在分瓣结晶器系统中的分布规律.在切缝区域连铸坯表面磁感应强度较其他区域稍强,20000 Hz时约为10％;由于电磁场透过切缝作用于连铸坯上,连铸坯表面所受的电磁体积力在横向较为均匀;当钢液面位于感应线圈中部时,沿拉坯方向钢液面以下附近电磁场的作用最强,然后逐渐降低.Some electromagnetic parameters in soft contact continuous casting mold of billet were analyzed through 3-D FEM numerical simulation method. The distribution characters of magnetic flux density, electromagnetic body force, induction eddy current in the system including billet, mold and coil were obtained. The action of magnetic flux density on surface of billet nearby slit of mold is a little stronger than that on billet nearby copper mold segment, it is about 10% when frequency is 20000 Hz. The electromagnetic body force imposed on surface of strand is relatively even along the transverse direction due to electromagnetic field permeating the slits of copper mold. When the meniscus of liquid steel located at the middle of the coil along the drawing direction, the action of electromagnetic field is most strong under the meniscus and depressed gradually to exit of mold.

关 键 词：软接触电磁连铸 结晶器 有限元法 数值模拟 方坯连铸 

分 类 号：TF777.2[冶金工程—钢铁冶金] TB115[理学—数学]