某电解铝厂500 kA电解槽热场仿真模拟  

Analogue Simulation of Thermal Field of 500 kA Electrolysis Cell in a Certain Aluminum Electrolysis Plant

作　　者：张嘉 ZHANG Jia(Guiyang Aluminum Magnesium Design ＆ Research Instilute Co.,Lid.,Guiyang,Guizhou 550081,China)

机构地区：[1]贵阳铝镁设计研究院有限公司,贵州贵阳550081

出　　处：《有色冶金设计与研究》2018年第3期51-54,共4页Nonferrous Metals Engineering & Research

基　　金：贵州省科技重大专项计划"铝电解槽内衬用新型碳/碳复合材料整体成型应用研究"(黔科合重大专项字[2016]3012)

摘　　要：通过利用Solid Works三维建模及ANSYS Workbench三维仿真模拟软件,研究了铝电解槽在正常生产状态下,其有限元分析的几何切片模型以及相应的边界条件和数学模型。针对某电解铝厂的500 k A电解槽,通过计算确定了其复杂的边界条件,建立了较为全面的数学模型和精确的几何切片模型。以此作为前提条件,对该模型进行热电场计算分析。By using Solid Works three-dimensional modeling and ANSYS Workbench three-dimensional analogue simulation software, the paper makes a study of the geometric slicing model of finite element analysis and the corresponding boundary conditions and mathematical model in aluminum electrolysis plant at the normal production state. For 500 k A electrolysis cell in a certain aluminum electrolysis plant, the paper determines the complicated boundary conditions; establish a more comprehensive mathematical model and accurate geometric slicing model through the calculation. As a prerequisite, the analysis of thermoelectric field calculation is carried out to the model.

关 键 词：铝电解槽 热电场耦合分析 有限元分析 

分 类 号：TF821[冶金工程—有色金属冶金]