检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈昌富[1] 黎玉琪 CHEN Changfu;LI Yuqi(College of Civil Engineering,Hunan University,Changsha,Hunan 410082,China)
机构地区:[1]湖南大学岩土工程研究所,湖南长沙410082
出 处:《公路工程》2018年第3期35-39,共5页Highway Engineering
基 金:国家重点研发计划(2016YFC0800203)
摘 要:传统理论分析方法在分析桩体荷载位移关系时,都存在各自不同的缺陷。剪切位移法假定桩土界面不产生相对滑移,荷载传递法的分析计算是基于一种表征桩侧摩阻力与桩体总位移关系的桩土荷载传递模型之上,但事实上桩侧摩阻力是由桩土界面相对滑移产生的。通过对抗拔桩变形模式进行分析发现,桩体总位移可以分为桩土界面相对位移与桩土界面外土体位移两部分。因此,通过建立一种表征桩侧摩阻力与桩土界面相对位移关系的桩土界面荷载传递模型,结合使用桩土界面荷载传递原理与剪切位移法对两部分位移量进行计算,从而得到了不同荷载作用下桩体总位移。通过与工程实例进行对比,证明了本方法的合理性。The traditional theoretical analysis method has different defects in the analysis of pile displacement. The shear displacement method assumes that the pile-soil interface does not produce relative slip. And the analysis of the load transfer method is based on a pile-soil load transfer model that characterizes the relationship between pile-side friction and the absolute displacement of the pile-soil. But in fact,the pile side friction is caused by the relative slip of the pile-soil interface. The author analyzes the deformation model of the pile,and finds that the displacement of pile at any position can be partitioned to the relative displacement on pile-soil interface and the displacement of surrounding soils. Therefore,this paper establishes a pile-soil interface load transfer model that characterizes the relative displacement relationship between friction and pile-soil interface. The displacement of the two parts is calculated by using the pile-soil interface load transfer principle and the shear displacement method,and the total displacement of the pile under different loads is obtained. The applicability and accuracy of this method was examined on an practical example.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.248