复合加工制备的超细晶工业纯钛室温蠕变行为  

Creep Behavior of Ultra-fine Grained CP Ti Processed by Combined Deformation at Room Temperature

作　　者：杨西荣[1] 陈小龙 罗雷[1] 刘晓燕[1] 蔡文华 Yang Xirong;Chen Xiaolong;Luo Lei;Liu Xiaoyan;Cai Wenhua(Shaanxi Engineering Research Center of Metallurgy,Xi＇an University of Architecture and Technology,Xi＇an 710055,China)

机构地区：[1]西安建筑科技大学陕西省冶金工程技术研究中心,陕西西安710055

出　　处：《稀有金属材料与工程》2018年第7期2126-2131,共6页Rare Metal Materials and Engineering

基　　金：国家自然科学基金面上项目(51474170);陕西省自然科学基础研究青年人才项目(2016JQ5026);陕西省教育厅重点实验室项目(15JS058)

摘　　要：采用工业纯钛TA1经等径弯曲通道变形(Equal channel angular pressing,ECAP)+冷轧(Cold Rolling,CR)+旋锻(Swaging)的方法制得晶粒尺寸约为120nm的超细晶工业纯钛,通过单轴拉伸蠕变实验、透射电子显微镜(TEM)、扫描电子显微镜(SEM)等方法,研究室温下超细晶工业纯钛蠕变变形行为及机理。结果表明:在实验应力范围内,超细晶工业纯钛存在明显的室温蠕变现象;随加载应力的升高(640～760 MPa),蠕变量增加,稳态蠕变速率增大(2.8×10^(-7)～1.5×10^(-4)s^(-1));在相同蠕变应力水平(0.8σ_s)下,超细晶工业纯钛稳态蠕变速率(2.8×10^(-7)s^(-1))低于粗晶工业纯钛(8.6×10^(-6)s^(-1)),抗蠕变性能优于粗晶工业纯钛;位错滑移机理是其主要蠕变变形机理,蠕变断裂机制为韧性断裂。Ultra-fine grained commercially pure（CP） Ti with an average grain size of 120 nm was fabricated by equal channel angular pressing（ECAP） followed by cold rolling（CR） and swaging at room temperature. Uniaxial tensile creep tests, transmission electron microscope and scanning electron microscope were applied to investigate the creep behavior and mechanism of ultra-fine grained CP Ti.The results show that a significant creep deformation at room temperature occurs in the ultra-fine grained CP Ti. The steady creep rate increases（2.8×10-7～1.5×10^（-4）s^（-1）） as the creep stress increases（640-760 MPa）. Ultra-fine grained CP Ti has a lower steady creep rate than the coarse-grained CP Ti at the same stress level, which indicates that ultra-fine grained CP Ti has higher creep resistance. The creep mechanism of ultra-fine grained CP Ti is dislocation movement, and the creep fracture morphology of ultra-fine grained CP Ti exhibits ductile fracture with dimples.

关 键 词：超细晶 工业纯钛 蠕变 应力指数 位错滑移 

分 类 号：TG146.23[一般工业技术—材料科学与工程]