弧齿线摆线圆柱齿轮副的几何参数与承载力分析  

Analysis of Geometric Parameters and Bearing Capacity of Arc-tooth-trace Cycloidal Cylindrical Gear Pairs

作　　者：柏华文 黄文杰 宋爱平[1] 彭云[1] BAI Huawen;HUANG Wenjie;SONG Aiping;PENG Yun(College of Mechanical Engineering,Yangzhou University,Yangzhou Jiangsu 225127,China)

机构地区：[1]扬州大学机械工程学院,江苏扬州225127

出　　处：《汽车零部件》2018年第7期6-11,共6页Automobile Parts

基　　金：江苏省大学生创新训练计划项目(201711117014Z)

摘　　要：提出一种新型齿轮——弧齿线摆线圆柱齿轮,根据齿轮副啮合原理推导出齿廓曲线方程,并论述其基本几何参数,分析计算该齿轮副的重合度。设计该齿轮的三维造型,对弧齿线摆线圆柱齿轮副传动的接触应力和弯曲应力进行分析。结果表明:弧齿线半径在一定范围内时,弧齿线摆线圆柱齿轮副的接触应力和弯曲应力比渐开线圆柱齿轮副的接触和弯曲应力更小,其承载力比相同尺寸的渐开线圆柱齿轮更大。A new type of gear arc-tooth-trace cycloidal cylindrical gear was proposed. The tooth profile equation was deduced according to the gear meshing principle,and the basic geometric parameters were discussed. The coincidence degree of the gear pair was analyzed and calculated. The three-dimensional model of the gear was designed,and the contact stress and bending stress of the arc-tooth-trace cycloidal cylindrical gear pairs transmission were analyzed. The analysis results show that the contact stress and bending stress of the arc-tooth-trace cycloidal cylindrical gear pairs are smaller than that of the involute cylindrical gear pairs when the radius of arc-tooth-trace is within a certain range,and its bearing capacity is greater than that of involute cylindrical gear pairs with same size.

关 键 词：弧齿线摆线圆柱齿轮 弧齿线半径 应力分析 有限元分析 

分 类 号：TH16[机械工程—机械制造及自动化] TH132